Manual Qlima PGP113 (page 51 of 104) (English, Dutch, French, Italian, Spanish, Norwegian)

689391

Zoom out

Zoom in

1/104

90°).

c) Press down the variable control knob and hold for 30 seconds. While holding

down the variable control knob press the igniter button several times until

the pilot flame ignited. Release the variable control knob 10~20 seconds after

the ignition.

Note:

1. If a new tank has just been connected, please allow at least one minute or

more for the air in the gas pipeline to purge out through the pilot hole,

2. When lighting the pilot flame make sure that the variable control knob is

continuously depressed while pressing the igniter button. Variable control

knob can be released after the pilot flame lit for 10-20 seconds.

3. Pilot flame can be watched and checked from the peephole Iocated on the

base of burnerhead . If the pilot flame does not light or it goes out, repeat

step c.

d) Turn the variable controI knob to LO and Ieave it there for 5 minutes or more

before turning the knob to desired temperaturesetting.

e) If the burner flame goes out accidentally or it is blown out by wind, turn off

the heater and wait at Ieast 5 minutes or more to let the gas dissipate before

re-lighting to avoid possible gas explosion. Repeat steps b to d.

E FR GB IT N NL

Apagado Off Off Spenta Av Uit

Posición de

encendido

Position

d'allumage

Ignite posi-

tion

Posizione di

accensione

Tenn i

posisjon

Ontstekings

positie

Capacidad

baja

Capacité

faible

Low capa-

city

Bassa capa-

cità

Lav kapa-

sitet

Laag ver-

mogen

Alta capaci-

dad

Capacité

élevée

High capa-

city

Alta capa-

cità

Høy kapa-

sitet

Hoog ver-

mogen

Table 1

TO TURN OFF THE HEATER

a) Turn the variable control knob to PILOT position.

b) Press and turn the variable control knob to OFF position.

c) Turn off the valve on the gas cylinder and disconnect the cylinder.

WARNINGS

• The whole gas system. hose, regulator, pilot and burner should be inspected

for Ieak before use. But at least once a month and each time the gas cylinder

is changed. Check the hose assembly for sign of extreme abrasion, cuts or

wears. Suspected areas should be Ieak tested. If the hose Ieaks, it must be

replaced with a new one that conforms to IocaI standard codes. ). If it shows

signs of cracking, splitting or other deterioration it shall be exchanged for

new hose of the same length and of the equivalent quality.

• Make sure the ventilation opening of the cylinder enclosure, controI com-

partment, burner and circulation air passageways of the heater are free and

clear of debris. If debris, spider or insect nests are found, clean the holes with

heavyduty pipe cleaner or compressed air.

• Always keep a dry chemical fire extinguisher readily available.

• For safety, always allow a 5-minute complete shut off period before re-light-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Qlima PGP113 in the language / languages: English, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 5,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Qlima PGP113 Manual

Product: