Manual Qlima PGP113 (page 49 of 104) (English, Dutch, French, Italian, Spanish, Norwegian)

689391

Zoom out

Zoom in

1/104

ASSEMBLY PROCEDURES

Hardware Used

Step 1: pic. 3

• Assemble the wheel assembly to the bottom plate. Fix the wheel assembly to

the bottom plate using 4 pcs bolt M6X12 and 4 pcs flange nut M6.

Step 2.1-2.2: pic. 4

• Unscrew the switch button, load small battery, tighten the switch button.

Insert the pins of the base to the holes of lower support, press to secure the

pins. Using 4 pcs screw M5X12 to secure the lower support and base. Insert

the pins of the control box assy to the holes of upper support, press to secure

the pins. Using 4 pcs screw 3/16” screw to secure the upper support and con-

trol box assy.

Step 3: pic. 5

• Assemble block belt. Fix the block belt to the 2 pcs of lower support behind

the front door, using 2 pcs screw M5X12.

Step 4: pic. 6

• Assemble the middle support. Insert the 4 pcs upper support to the lower

support. Secure them with 8 pcs screw 3/16”.

Step 5: pic. 7

• Assemble the flame screen to the upper support. Secure the flame screen to

the upper support using 8 pcs screw 3/16”.

Step 6: pic. 8

• Assemble the reflector onto the flame screen. Screw the 3 pcs stud on the

flame screen, put 3 pcs washer Φ6 onto the top of stud, then put the reflec-

tor onto the stud, secure them with 3 pcs washer Φ6 and 3 pcs wing nut.

Step 7: pic. 9

• Carefully install the glass tube by lifting up and inserting through the center

hole in the upper plate. Ensure the black silicone ring is attached to the

lower edge of the glass tube as illustrated. Slide the glass tube through the

hole of the lower plate cover and onto the middle plate. Check and ensure

that the glass tube is positioned properly and is completely covering the

center hole of the middle plate.

To aid in installation place black silicone ring on the middle plate and then

install glass tube. Ensure the rim of the glass tube sits firmly in the black sili-

cone ring.

WARNING! The black silicone ring must be in place prior to operating the

heater.

Step 8: pic. 10

• Assembly the protective guard. Hang the hooks of the protective guard onto

the holes in supports. Secure the protective guards with fixing brackets with 4

pcs 3/16” screws.

Step 9: pic. 11

• Attach the three side panels to the heater using 18 pcs screw 3/16”.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Qlima PGP113 in the language / languages: English, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 5,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Qlima PGP113 Manual

Product: