689391
50
Zoom out
Zoom in
Previous page
1/104
Next page
50
Note : Do not cover the front side where the control knob is.
Step 10: pic. 12
Install the knob to M4X6 screw. Hang the chain to the hole on the control
box assy and put the pothook of front panel to the holes of bottom plate.
Step 11: pic. 13
Connect the gas hose and regulator after that connect the regulator to the
gas cylinder.
WARNING! Ensure the hose does not contact any high temperature surfaces,
or it may melt and leak causing a fire. After the cylinder is placed inside the
heater, secure the cylinder with block belt tightly.
OPERATION
Connect the gas hose to the gas connector. (pic. 14)
Please note:
- The gas hose is NOT included with the heater. Hose must be purchased sepa-
rately
- Minimum / Maximum length gas hose: 60-80 cm
- Screw connection (France G1/2) is fitted as standard
- Hoses 8-13 mm. can be fitted as well. When required: use the multi country
connector supplied. Fitting of the multi country connector is described in the
separate manual supplied in with the included multi country kit. When using
the multi country connector: ALWAYS make sure to use hose clamps!
For gas hose with threaded connectors: bind 2 or more rounds of plumbing
tape around the gas pipe before connecting the gas hose for security.
Bind 2 or more rounds of Teflon plumbing tape around the gas burner inlet
connector and connect the gas pipe. Use a wrench to tighten the connection.
Connect the other end of your gas hose according to the mounting instruc-
tion as supplied with the gas hose and/or supplied with the gas regulator.
Note:
- The gas hose is NOT included with the heater
- The gas regulator is not included with the heater
Connect the regulator to the gas cylinder (not included) according to the
mounting instruction as supplied together with the gas regulator and/or the
gas cilinder
Put gas cylinder on the base.
LIGHTING INSTRUCTION
Check and ensure that an AA battery is inside the ignition chamber. Use a
new battery so you are sure the battery is full of power.
Ensure that the ‘+’ side of the battery is facing outside (so ‘+’ faces towards
the user)
TO TURN ON THE HEATER
Check that the regulator seal is correctly fitted and able to fulfil its function.
a) Open the valve on the gas supply cylinder.
b) Press and turn the variable control knob to PILOT position (counter-clockwise
4
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Qlima PGP113 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Qlima PGP113 in the language / languages: English, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info