490689
21
Zoom out
Zoom in
Previous page
1/160
Next page
21
After finishing work
Switching the vacuum cleaner off and
storage
1. After picking up
hazardous dust,
vacuum clean
the outside of
the cleaner.
2. Switch off the
vacuum cleaner
and pull the
mains plug out
of the socket.
3. Wind up the
power cord
and hang it on the handle.
4. Empty the tank and clean the vacuum cleaner.
5. After picking up liquids: Store the upper section
of the cleaner separately so that the filter element
can dry.
6. Store the vacuum cleaner in a dry room where it
is protected from unauthorized use.
Maintenance
Maintenance plan
After
As
finishing
required
work
Replacing the waste bag
Replacing the filter bag
Replacing filter element
Replacing filter element
Emptying dirt tank after
picking up liquids
Maintenance work
Replacing the waste bag
Clean the cleaner thoroughly before replacing the
waste bag – see section “Cleaning the filter element”.
During the following work, ensure that dust is
not unnecessarily spread around. Wear a P2
breathing mask.
1. Remove the upper part of the vacuum-cleaner.
2. Release the fastening catch (1) and remove the
washer from the container (2).
3. Close the waste bag using the cable connector.
4. Dispose of the vacuumed waste in accordance
with the law.
5. Insert a new filter bag into the cleaned tank as
described in the instructions enclosed.
Replacing the filter bag
During the following work, ensure that dust is
not unnecessarily spread around. Wear a P2
breathing mask.
1. Open the
retaining clamps
and remove the
upper section of
the cleaner from
the dirt tank.
2. Carefully remove
the filter bag
connection from
the inlet fitting.
3. Close the filter
bag connection
with the slide.
4. Dispose of the filter bag in accordance with legal
regulations.
5. Place a new filter bag into the cleaned tank as
described in the instructions (printed on the filter
bag).
IMPORTANT: Press the filter bag connection on the
inlet fitting as far as possible.
Replacing filter element
During the following work, ensure that dust is
not unnecessarily spread around. Wear a P2
breathing mask.
1. Open the
retaining clamps
and remove the
upper section of
the cleaner from
the dirt tank.
Lay the upper
section of the
cleaner down
with the filter
element facing
upwards. Do not
place the upper
section of the cleaner on the guard (1) and do not
damage the filter element.
2. Open the bar handle (2) and remove it.
3. Remove the filter holder (3).
3
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool VCP700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool VCP700 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 20,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info