490689
22
Zoom out
Zoom in
Previous page
1/160
Next page
22
4. Place the pro-
tective filter bag
over the filter
element.
5. Carefully remove
the filter element
and close the
protective filter
bag with a knot.
6. Clean the filter
seal (4). Check it
for damage and
replace it if
necessary.
7. Check the anti-
static clamp (5)
for damage and
have it replaced
by PROTOOL
Service if
necessary.
8. Check that the
control flap (6)
for filter cleaning
works properly.
The control flap
should move
back and for-
wards easily.
9. Clean the level
hose (7).
10. Fit a new filter
element.
11. Fit the filter
holder. Ensure
that it is in the
correct position.
12. Fit bar and close
bar handle.
13. Dispose of the
used filter ele-
ment in accor-
dance with legal
regulations.
Never use the vacuum cleaner without a
filter.
Emptying dirt tank
Only after picking up harmless dust without a
filter bag.
After vacuuming liquids: clean the edge of the
waste container and the seal on the washer.
1. Remove the
upper part of the
vacuum-cleaner
from the waste
container.
2. Release the
fastening catch
and remove the
washer.
3. Pull up the lever
on the handle
and tip the con-
tainer.
4. Tip out the waste
and dispose of it
in accordance
with the law.
OR
3. Release the
catch (4) on the
waste container.
4. Grasp the con-
tainer by the
handles (5) and
lift it out.
5. Tip out the waste
and dispose of it
in accordance
with the law.
6. Put in a new
waste container
and fasten it in
place (4).
Environmental Protection/
Disposal
Power tools, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical and
electronic equipment and its incorporation into
national law, power tools that are no longer suitable
for use must be separately collected and sent for
recovery in an environmental-friendly manner.
1
3
1
2
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool VCP700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool VCP700 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 20,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info