490689
19
Zoom out
Zoom in
Previous page
1/160
Next page
19
Connecting electrical appliances
To comply with regulations, only approved dust
producing tools should be connected. The maximum
power consumption of the connected power tool is
stated in section “Technical data”.
1. Ensure that the electrical appliance is
switched off.
2. Connect the electrical appliance to the appliance
socket on the control panel.
Switching on the vacuum cleaner
Switch position MAN
1. Turn the switch
to position MAN.
The vacuum
cleaner motor
starts.
VCP 700 E-M
The hose diameter and the setting for the suction
hose diameter must be the same.
Hose Hose diameter setting
27 27
32 32
36 36
50 50
Switch position AUTO
Before switching
the switch to posi-
tion AUTO, ensure
that the tool
connected to the
appliance socket is
switched off.
1. Turn the switch
to position
AUTO. The
vacuum cleaner
motor starts
when the connected appliance is switched on.
2. When the power tool is switched off the vacuum
cleaner continues to run for a short moment so
that any dust in the suction hose is conveyed to
the safety filter bag.
VCP 700 E-M
The hose diameter and the setting for the suction
hose diameter must be the same.
Hose Hose diameter setting
27 27
32 32
36 36
50 50
Suction power control
The motor speed
and the suction
power can be
varied with the suc-
tion power control.
This allows precise
adaptation of the
suction power for
different cleaning
tasks.
Check volume flow monitor
Before picking up dust with maximum room
concentration values:
1. Check that all the filters are present and properly
fitted.
2. When the motor is running, hold the suction hose
shut. An acoustic warning sounds after approx.
1 second.
Acoustic warning (VCP 700 E-M only)
For safety reasons, an acoustic warning sounds if
the air speed in the suction hose drops to below
20 m/s. See section “Troubleshooting”.
Cleaning the filter element
To ensure that suction performance is always at its
best, the filter element is automatically cleaned
during operation.
We recommend complete cleaning if the filter ele-
ment becomes extremely dirty.
After picking up harmless dust using the waste bag.
1. Switch off the vacuum cleaner
2. Close the nozzles or suction hose opening with
the palm of your hand.
3. Turn the switch to position MAN and let the
cleaner operate for approx. 10 seconds with the
suction hose opening closed.
10 sec.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool VCP700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool VCP700 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 20,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info