Manual Protool VCP700 (page 18 of 160) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

490689

Zoom out

Zoom in

1/160

Intended use

Purpose and intended use

The vacuum cleaners described in this operating

manual are suitable for

- commercial use, e.g. in hotels, schools, hospitals,

factories, shops, offices and rental businesses

The following materials should not be picked up by

the vacuum cleaner:

- hot materials (burning cigarettes, hot ash, etc.)

- flammable, explosive, aggressive liquids (e.g.

petrol, solvents, acids, alkalis, etc.)

- flammable, explosive dust (e.g. magnesium or

aluminium dust, etc.)

When dust removers are used, the rate at which air

is exchanged in the room must be adequate if the

exhaust air from the vacuum cleaner is blown into

the room (please observe regulations valid in your

country).

Before starting work, the operating staff must be

informed on

- use of the vacuum cleaner

- risks associated with the material to be picked up

- safe disposal of the picked up material.

VCP 700 E-L

This cleaner is suitable to pick up dry, nonflammable

dust, liquids, sawdust and hazardous dusts with

maximum room concentration values ≥ 1 mg/m

(dust class L).

VCP 700 E-M

This cleaner is suitable to pick up dry, nonflammable

dust, liquids, sawdust and hazardous dusts with

maximum room concentration values ≥ 0.1 mg/m

(dust class M).

Depending on how hazardous the dust is, the

cleaner must be fitted with appropriate filters. See

table in section “Picking up dry substances”.

Before start-up

Assembling the cleaner

On delivery some of the accessories are lying in the

tank and must be removed before the vacuum

cleaner is used for the first time. Remove the upper

section of the vacuum cleaner: The mains plug

should not be inserted into a socket.

1. Open the

retaining clamps

and lift off the

upper section of

the cleaner.

2. Take the acces-

sories out of the

dirt tank and the

packaging.

3. To pick up dust

with maximum

room concen-

tration values:

Insert the filter bag into the dirt tank according to

the instructions (instructions included).

To pick up harmless dust:

Insert the disposal bag (instructions included) into

the tank.

IMPORTANT: Press the filter bag connection

firmly on to the inlet fitting.

4. Fit the upper section of the vacuum cleaner and

close the retaining clamps.

NOTE: Ensure that the retaining clamps fit pro-

perly.

Operation

Connections

Connecting the suction hose

1. Connect the

suction hose.

The suction hose

diameter must suit

the position of the

switch in order to

pick up dry, non-

flammable dust with

maximum room

concentration

values.

Electrical connection

The operating voltage shown on the rating plate

must correspond to the voltage of the mains power

supply.

1. Ensure that the vacuum cleaner is switched

off.

2. Insert the power cord into a properly installed and

fused socket with an earthing contact.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool VCP700 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 20,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool VCP700 Manual

Product: