490621

Protool VCP 480E-M Manual

18
Zoom out
Zoom in
Previous page
1/132
Next page
18
7 Settings
7.1 Adjusting the hose diameter
(only for dust class M)
Set the hose diameter setting [1-10] to the
connected hose diameter.
This ensures that the airspeed in the suc-
tion hose is measured correctly.
7.2 Connecting electric power
tools
WARNING
Risk of injury
Observe the maximum connected loads
for the appliance socket (see chapter
“Technical data”).
Make sure that the power tool is switched
off before connecting or disconnecting.
Connect the electric power tool to the ap-
pliance socket [1-3].
7.3 Adjusting the suction power
You can use the suction power adjuster [1-8]
to adapt the machine suction power to dif-
ferent applications.
7.4 Applying the brake
Folding out the black brake lever [1-14]
prevents the mobile dust extractor from
rolling. To achieve this, lift the front end of
the mobile dust extractor slightly and push
the black brake lever downwards until it
latches into place. Push the lever [1-13]
again to release.
7.5 Temperature cut-out
To prevent overheating, a temperature cut-
out switches the mobile dust extractor off
when it reaches a critical temperature.
► Switch off the mobile dust extractor and
allow to cool for about 5 minutes.
If the mobile dust extractor will not switch
on again, please contact a PROTOOL service
workshop.
7.6 Changing the fi lter bag
Removing the fi lter bag [3]
Open the locking clips [2-2] and remove the
top section of the machine [2-1].
Remove the fi lter bag.
Dispose of the used fi lter bag in accordance
with statutory regulations.
Clean the dust container [2-3].
Inserting the fi lter bag [4]
Insert a new fi lter bag in the inlet port of
the dust container and interlock it.
Important: be aware that the locking en-
gages.
Replace the top section [2-1] and close the
locking clips [2-2].
► Make sure that the fi lter bag is not pinched
between the top and bottom sections.
7.7 Changing the disposal bag
Removing the disposal bag [5]
Close off the extractor opening [1-1] using
the sealing plug [1-15] (standard equip-
ment for VCP 260/480 M).
Open the locking clips [2-2] and remove the
top section of the machine [2-1].
Close the disposal bag.
Remove the disposal bag.
Dispose of the used disposal bag in accord-
ance with statutory regulations.
Clean the dust container [2-3].
Inserting the disposal bag [6]
Insert a new disposal bag on the inlet noz-
zle of the container and lock in position.
Important: The lateral openings on the dis-
posal bag must be positioned inside the con-
tainer. Make sure that the bolt engages.
Place the disposal bag over the edge of the
container.
Make sure that the contacts [9-2] are
free.
Replace the top section [2-1] and close the
locking clips [2-2].
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool VCP 480E-M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool VCP 480E-M in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info