490621

Protool VCP 480E-M Manual

17
Zoom out
Zoom in
Previous page
1/132
Next page
17
- Do not damage the mains power cable
(e.g. by driving over, dragging, etc.).
Protect from heat, oil and sharp edges.
Do not pull the plug from the socket by
the cable.
- Check the plug and the cable regularly
and have them replaced by an authorised
service workshop should either become
damaged cable with the type specifi ed in
the spare parts list. Always replace the
mains power cable with the type specifi ed
in the spare parts list.
- Do not expose the machine to rain.
- The machine should only be used by ap-
pointed persons instructed in correct ma-
chine handling.
- Before use, operators shall be provided
with information, instruction and train-
ing for the use of the machine and the
substances for which it is to be used, in-
cluding the safe method of removal and
disposal of the material collected.
- For reasons of safety, never operate the
machine from an unearthed socket.
- Always use the machine socket for the
purpose specifi ed in the manual.
- Always use original PROTOOL accesso-
ries.
- Pull the plug from the socket when the
machine is not in use and prior to main-
tenance and cleaning work.
- Do not lift or transport the machine by
the handle using a crane or lifting gear.
6 Operation
WARNING
Unauthorised voltage or frequency!
Risk of accident
The mains voltage and the frequency of
the power source must correspond with
the specifi cations on the machine’s name
plate.
6.1 Initial operation
Open the locking clips [2-2] and remove the
top section of the machine [2-1].
Remove the accessories from the dust con-
tainer [2-3] and the packaging!
Insert the sealing plug [1-15] into the suc-
tion opening [1-1] (for dust class M only).
Insert a fi lter or disposal bag in the dirt trap
(see chapter 7.6 and 7.7).
Replace the top section [2-1] and close the
locking clips [2-2].
Fit the accessory box to the back of the
vacuum cleaner.
Connect the suction hose to the machine.
Accessory box
Hook the accessory box onto the upper
section [2-1] and fasten in place with two
screws [2-5].
The accessory box is equipped with a pipe
holder which has space for three pipes.
If the pipe holder is not needed, it can be
removed without the use of tools: Lift the
latch, tip the pipe holder backwards and
remove it – see fi gure [2].
The suction pipe with the fl oor tool fi tted
can be easily stored in the groove on the
accessory box. The adapter on the pipe
must be fastened in the correct position
– see fi gure [2].
6.2 Switch on/off
► Insert the plug into an earthed socket.
WARNING
Risk of injury from tools starting up
unexpectedly
Before setting the switch to the “AUTO” or
“MAN” position, make sure that the con-
nected tool is switched off.
The switch [1-9] serves as an on/off switch.
Switch position “0”
Appliance socket [1-3] is disconnected from
the power, mobile dust extractor is switched
off.
“MAN” switch position
Appliance socket [1-3] is connected to the
power, the mobile dust extractor starts.
“Auto” switch position
Appliance socket [1-3] is connected to the
power, the mobile dust extractor starts
when the connected tool is switched on.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool VCP 480E-M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool VCP 480E-M in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info