70266

Protool VCP 260 E L Manual

19
Zoom out
Zoom in
Previous page
1/132
Next page
19
8 Working
8.1 AUTOClean - Cleaning the
main fi lter
To maintain a constant suction power when
extracting fi ne dust, you can adjust the
frequency of the automatic [1-7] cleaning
system in infi nite variables using the rotary
knob. Always use the automatic cleaning
system in combination with a disposal bag
(in line with dust class ‘M’ requirements).
Always use a fi lter bag when the cleaning
function is switched off (except for when
wet vacuuming).
Before performing wet extraction
tasks or working with a fi lter bag, set
the rotary knob to position 0.
For large amounts of dust, optimum opera-
tion is only possible if dedusting is switched
on.
Manual cleaning
If the suction power decreases, clean-
ing can be started manually by turn-
ing the switch [1-9] to the AC symbol
positioned on either side of the switch.
We recommend cleaning the main fi lter
completely if severely clogged:
Set the suction power adjuster [1-8] to the
maximum setting.
Cover the end of the nozzle or suction hose
with your hand for 10 seconds.
Turn the switch to the [1-9] AC symbol.
In intensive applications that generate ad-
herent dust, it may be necessary to clean
the fi lter element mechanically under cer-
tain circumstances (extract). Wear a dust
mask!
8.2 Extracting dry materials
CAUTION
Hazardous dust
Damage to the respiratory passage
Use a fi lter or disposal bag when extract-
ing hazardous materials!
Do not use the machine if the volumetric
fl ow monitoring function is inactive.
Observe the following when extracting
dust generated by operating electric power
tools:
If the exhaust air is discharged back into
the room, the air renewal rate L within
the room must be suffi cient. The volume of
air discharged back into the room must not
exceed 50% of the fresh air volume fl ow
(room volume V
R
x air renewal rate L
W
).
Observe all the relevant regional regula-
tions.
Remember: A moist main filter clogs
more quickly when extracting dry materi-
als. Therefore, dry the main fi lter before
extracting dust or replace the damp fi lter
with a dry one.
7.8 Volumetric fl ow monitoring
An acoustic warning signal sounds if the air speed in the suction hose falls below 20 m/s
(for dust class M only).
Possible causes Solution
Value set on the suction power adjuster
[1-8] is too low.
Set the suction power adjuster to a higher
value (see Chapter 7.3).
The rotary knob [1-10] is not set to the
hose diameter setting (only for dust
class M).
Set the correct hose diameter.
Suction hose blocked or kinked. Remove blockage or kink.
Filter bag/disposal bag full. Insert a new fi lter bag (see Chapter 7.6).
Filter element clogged. Clean fi lter element (see Chapter 8.1).
Change the fi lter element (see Chapter 9.1).
Monitoring electronics malfunction. Send to a PROTOOL service workshop for
repair.
Wet extraction. Functional reliability not affected, no
actions required.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool VCP 260 E L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool VCP 260 E L in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info