Manual Protool VCP 260 E L (page 20 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

70266

Zoom out

Zoom in

1/132

8.3 Extracting ﬂ uids

Before extracting ﬂ uids, remove the ﬁ lter

or disposal bag (see chapters 7.6, 7.7). We

recommend using a special wet ﬁ lter.

The dust extractor stops automatically when

the maximum level is reached.

CAUTION

Escaping foam and ﬂ uids

► Switch off the machine immediately and

empty the dirt trap.

8.4 The antistatic system

Friction inside the extraction hose causes

static electricity to develop during extrac-

tion. Operating personnel may receive un-

pleasant electric shocks while working. The

mobile dust extractor is ﬁ tted with an anti-

static system as standard to discharge any

static electricity that may develop. How-

ever, always use the enclosed antistatic

extraction hose.

8.5 After ﬁ nishing work

Switch off the mobile dust extractor and

disconnect the plug.

Clean the main ﬁ lter automatically or man-

ually (see chapter 8.1).

Empty the dust container.

Wind the cable around the raised area on

the accessory box. Clamp the end of the

cable in the groove – see ﬁ gure [10].

Fold the hose clip upwards. Wind the hose

around the suction coupling and the bracket

of the hose clip. Slide the end of the hose

over the bracket.

CAUTION

Hazardous dust

Damage to the respiratory passage

Wipe down the mobile dust extractor and

clean all accessories thoroughly using the

extractor (inside and out) before removing

from the working area.

Parts that you were not able to clean thor-

oughly must be sealed in an airtight plas-

tic bag prior to transportation.

Wear a dust mask!

The machine shall be stored indoors

only.

► Place the mobile dust extractor in a dry

room inaccessible to unauthorised us-

ers.

9 Service and maintenance

WARNING

Risk of injury, electric shock

Always disconnect the mains plug from

the socket before performing maintenance

work on the machine!

All maintenance and repair work which

requires the motor housing to be opened

must only be carried out by an authorised

service workshop.

Damaged safety devices and components

must be repaired or replaced in a recog-

nised specialist workshop, unless otherwise

indicated in the operating manual.

Observe the following instructions:

- A dust test must be performed at least

once a year by the manufacturer or an

instructed person. This test may include

checks to determine whether the ﬁ lter is

damaged, the machine is sealed properly

and the monitoring features are function-

ing correctly.

- During maintenance and repair work,

all components that cannot be cleaned

satisfactorily must be replaced. The old

components must be sealed in imper-

meable plastic bags prior to disposal in

compliance with applicable regulations

for this type of waste.

- For user servicing, the machine must

be dismantled, cleaned and serviced, as

far as is reasonably practicable, without

causing risk to the maintenance staff and

others. Suitable precautions include, de-

contamination before dismantling, provi-

sion from local ﬁ ltered exhaust ventila-

tion where the machine is dismantled,

cleaning of the maintenance area and

suitable personal protection.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool VCP 260 E L in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool VCP 260 E L Manual

Product: