Manual Protool VCP 260 E L (page 17 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

70266

Zoom out

Zoom in

1/132

- Do not damage the mains power cable

(e.g. by driving over, dragging, etc.).

Protect from heat, oil and sharp edges.

Do not pull the plug from the socket by

the cable.

- Check the plug and the cable regularly

and have them replaced by an authorised

service workshop should either become

damaged cable with the type speciﬁ ed in

the spare parts list. Always replace the

mains power cable with the type speciﬁ ed

in the spare parts list.

- Do not expose the machine to rain.

- The machine should only be used by ap-

pointed persons instructed in correct ma-

chine handling.

- Before use, operators shall be provided

with information, instruction and train-

ing for the use of the machine and the

substances for which it is to be used, in-

cluding the safe method of removal and

disposal of the material collected.

- For reasons of safety, never operate the

machine from an unearthed socket.

- Always use the machine socket for the

purpose speciﬁ ed in the manual.

- Always use original PROTOOL accesso-

ries.

- Pull the plug from the socket when the

machine is not in use and prior to main-

tenance and cleaning work.

- Do not lift or transport the machine by

the handle using a crane or lifting gear.

6 Operation

WARNING

Unauthorised voltage or frequency!

Risk of accident

The mains voltage and the frequency of

the power source must correspond with

the speciﬁ cations on the machine’s name

plate.

6.1 Initial operation

Open the locking clips [2-2] and remove the

top section of the machine [2-1].

Remove the accessories from the dust con-

tainer [2-3] and the packaging!

Insert the sealing plug [1-15] into the suc-

tion opening [1-1] (for dust class M only).

Insert a ﬁ lter or disposal bag in the dirt trap

(see chapter 7.6 and 7.7).

Replace the top section [2-1] and close the

locking clips [2-2].

Fit the accessory box to the back of the

vacuum cleaner.

Connect the suction hose to the machine.

Accessory box

Hook the accessory box onto the upper

section [2-1] and fasten in place with two

screws [2-5].

The accessory box is equipped with a pipe

holder which has space for three pipes.

If the pipe holder is not needed, it can be

removed without the use of tools: Lift the

latch, tip the pipe holder backwards and

remove it – see ﬁ gure [2].

The suction pipe with the ﬂ oor tool ﬁ tted

can be easily stored in the groove on the

accessory box. The adapter on the pipe

must be fastened in the correct position

– see ﬁ gure [2].

6.2 Switch on/off

► Insert the plug into an earthed socket.

WARNING

Risk of injury from tools starting up

unexpectedly

Before setting the switch to the “AUTO” or

“MAN” position, make sure that the con-

nected tool is switched off.

The switch [1-9] serves as an on/off switch.

Switch position “0”

Appliance socket [1-3] is disconnected from

the power, mobile dust extractor is switched

off.

“MAN” switch position

Appliance socket [1-3] is connected to the

power, the mobile dust extractor starts.

“Auto” switch position

Appliance socket [1-3] is connected to the

power, the mobile dust extractor starts

when the connected tool is switched on.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool VCP 260 E L in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool VCP 260 E L Manual

Product: