490605
15
Zoom out
Zoom in
Previous page
1/87
Next page
DRP 18-4 DEC FF/ PDP 20-4 DEC FF
15
GB
9.2 Belt clip [1-9]
The user can attach the machine to work
clothing for short periods using the belt clip
(right/left).
9.3 Lighting
ON: Press the LED light switch[1-3].
OFF: Press the LED light switch [1-3] again.
X
The light remains switched on for approx.
20 s after the machine is disconnected
from the mains power.
9.4 Warning signals
Acoustic warning signal
An acoustic warning signal sounds and the
machine switches off in the following operat-
ing states:
Visual warning signal
A visual warning signal is issued and the ma-
chine switches off in the following operating
states:
10 Service and maintenance
To ensure constant air circulation, always
keep the cooling air openings in the motor
housing clean and free of blockages.
11 Environmental Protection/
Disposal
Power tools, accessories and packaging
should be sorted for environmental-friendly
recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive 2002/
96/EC on waste electrical and electronic
equipment and its incorporation into national
law, power tools that are no longer suitable
for use must be separately collected and sent
for recovery in an environmental-friendly
manner.
Information on REACh:
www.protool-on-
line.com/reach
12 EU Declaration of Conformi-
ty
We declare under sole responsibility that this
product complies with the following direc-
tives and standards:
2006/42/EC, 2004/108/EC, 2011/65/EU
(from 03.01.2013), EN 60745-1, EN 60745-
2-1, EN 60745-2-2, EN 55014-1, EN 55014-
2.
Stanislav Jakeš
Research, Development and Technical Docu-
mentation
Protool GmbH
Wertstr. 20
D-73240 Wendlingen
09.01.2012
Machine overloaded.
LED [1-3]
Red - flashing
Machine has overheated.
Press the Speed set button
[1-4] to switch the
machine to recovery mode.
Do not place under load
!
The machine reverts to
normal operating mode
once the machine has
cooled, if the Speed set
button or on/off switch are
pressed or the machine is
placed under load.
WARNING
Risk of injury, electric shock
X
Always disconnect the mains plug from the
socket before performing maintenance
work on the machine!
X
All maintenance and repair work which re-
quires the motor housing to be opened
must only be carried out by an authorised
service workshop.
peep peep peep
Drill / Impact drill Serial no.
DRP 18-4 DEC FF 495815
PDP 20-4 DEC FF 495816
2012
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool PDP 20-4 DEC FF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool PDP 20-4 DEC FF in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info