Manual Protool PDP 20-4 DEC FF (page 13 of 87) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

490605

Zoom out

Zoom in

1/87

DRP 18-4 DEC FF/ PDP 20-4 DEC FF

machine components and cause electric

shocks.

–

Switch of the power tool immediately

if the tool is blocked. Always be pre-

pared for high reaction torques that

can cause kickback.

The tool blocks if:

- the power tool is overloaded or - it be-

comes jammed in the workpiece being pro-

cessed.

–

Avoid unintentional activation. Ensure

that the on/off switch is in switched-

off position before inserting a battery.

Carrying the power tool with your finger at

the on/off switch, or inserting the battery

when the power tool is switched on, can re-

sult in accidents.

–

The machine must never be operated

when wet or located in a damp envi-

ronment.

Connect devices that you intend

to use outdoors via an earth leakage circuit

breaker (FI) with a maximum release cur-

rent of 30mA. Always use a cable approved

for outdoor use.

–

Wear suitable protection:

such as ear

protection, safety goggles, a dust mask for

work which generates dust, and protective

gloves when working with raw materials

and when changing tools.

– Secure the workpiece using clamping de-

vices.

– Check the plug and the cable regularly and

should either become damaged, have

them replaced by an authorised after-sales

service workshop.

– Always guide the cable backwards away

from the machine.

– Take care when drilling into walls as there

is a danger of rupturing concealed gas/wa-

ter pipes or cutting through power cables.

6Operation

6.1 Switch on/off

On/off switch [1-7]

Press = ON, release = OFF

The speed of the machine depends on

how far the on/off switch is pressed in.

Speed set button[1-4]

Press once = ON, press twice or press on/off

switch = OFF

6.2 Attaching the additional handle

[2]

Always use the additional handle.

Position the additional handle [2-2] on

the extension of the gearbox housing and

engage the recesses on the additional handle

in the lugs on the housing.

Turn the handle until secured in position.

Turn the handle to adjust the position in

30° increments.

The drilling depth can be adjusted using

the depth stop [2-1].

7 Settings

7.1 Changing the rotational direc-

tion [1-8]

• Switch to the left = clockwise

• Switch to the right = anticlockwise

7.2 Changing gear [1-6]

Only press the speed switch when the

machine is off. Otherwise there is a

danger of damaging the gearbox.

WARNING

Unauthorised voltage or frequency!

Risk of accident

The mains voltage and the frequency of

the power source must correspond with

the specifications on the machine's name

plate.

WARNING

Risk of injury, electric shock

Always pull the plug out of the socket be-

fore performing any type of work on the

machine!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool PDP 20-4 DEC FF in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool PDP 20-4 DEC FF Manual

Product: