490654
20
Zoom out
Zoom in
Previous page
1/132
Next page
20
10 Service and mainte-
nance
WARNING
Risk of accident, electric shock
Always pull the plug out of the socket
before performing any type of work on
the machine.
All maintenance and repair work which
requires the motor housing to be
opened, must only be carried out by
an authorised service workshop
Observe the following care and mainte-
nance instructions
- Keep the air slits on the machine and the
charger clean to ensure adequate cool-
ing.
- Keep the contacts on the machine, charg-
er and battery pack clean.
Information on battery packs
- Where possible, store the battery pack
in a cool, dry place at a temperature be-
tween 5 °C and 25 °C.
- Protect the battery pack from moisture,
water and heat.
- Signi cantly shorter operating times af-
ter each charge indicate that the battery
pack is worn and should be replaced with
a new one.
- The LiIon battery pack is fully compatible
with the charger! Integrated electron-
ics prevent overloading and overheating
during the charging process.
- LiIon battery packs can be used imme-
diately and recharged at any time, even
if they are not completely discharged.
- If the LiIon battery pack is stored without
use for a longer period of time, it can
only be charged to the 40% of its capac-
ity (the time of charging is 15 minutes
approximately), and its storage tempera-
ture must not exceed 25 °C.
- Battery packs are most ef cient at tem-
peratures between 20 °C and 30 °C.
- Storing the battery pack in an operating
charger keeps the battery pack continu-
ally charged.
- Do not leave at battery packs in a charg-
er disconnected from the mains power
supply for longer than one month. There
is a risk of total discharge.
Customer service and repair. Only
through manufacturer or service
workshops: Please nd the nearest
address at:
www.protool-online.com/service
EKAT
1
2
3
5
4
Use only original Protool spare parts!
Order No. at:
www.protool-online.com/service
11 Transport
The equivalent amount of lithium in the Li-
Ion battery pack is less than the applicable
limit value and certi ed as per UN manual
ST/SG/AC.10/11/rev. 3 part III, subsection
38.3. The LiIon battery pack is therefore
not subject to national and international
dangerous goods regulations, neither as
an individual component nor as a tted
machine component. However, dangerous
goods regulations may apply when several
battery packs are transported, in which
case you may have to ful l special condi-
tions. Refer to ADR special regulation 230
for more information relevant for the EU.
12 Accessories
Use only original PROTOOL accessories and
PROTOOL consumable material intended for
this machine because these components
are designed speci cally for the machine.
Using accessories and consumable material
from other suppliers will most likely affect the
quality of your working results and limit any
warranty claims. Machine wear or your own
personal workload may increase depending
on the application. Protect yourself and your
machine, and preserve your warranty claims
by always using original PROTOOL acces-
sories and PROTOOL consumable material!
13 Disposal
Return used or faulty battery packs to your
local specialist retailer, PROTOOL after-
sales service or a designated public waste
management facility. The battery packs will
then be recycled.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protool DWC 18-2500 DEC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protool DWC 18-2500 DEC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info