Manual Protool DWC 18-2500 DEC (page 19 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

490654

Zoom out

Zoom in

1/132

9 Working instructions

► The auto feed attachment must not be

held in the depth stopper area as there

are moving parts!

► Each screw adjustment must be com-

pleted. Interrupted fastening or releasing

of the pressure during adjustment can

result in unsatisfactory machine function.

► The collated screws and the auto feed

attachment can only be replaced when

the power tool is turned off.

► Never use the auto feed attachment in

any other way than speciﬁ ed in this in-

struction manual.

► Use only original screwing bits.

► Use only original collated screws.

► Always store the collated screws in origi-

nal packaging.

► Always work in right angle against the

attached board.

Maintenance of the auto feed attach-

ment

The attachment generally does not require

any maintenance. After long period use, we

recommend to clean with pressurized air.

The auto feed attachment may be lubri-

cated in the area of the carriage guide (see

picture [12 b]).

Prior to cleaning, dismantle the attachment,

as speciﬁ ed above.

Prior to cleaning, remove the collated

screws from the attachment, as speciﬁ ed

in the point Removing the collated screws.

Pull the auto feed attachment from the dry-

wall screwdriver.

Disassembly of the slides

1. Push the depth stopper [9-2] into the

housing until the arresting button [12-1]

is at the level of the sign for dismantling

the slides [12-2] – see ﬁ gure [12 a].

2. Press the arresting button [12-1] and

concurrently remove the slides from the

holder – see ﬁ gure [12 b].

3. Press the orange button [9-1] and con-

currently release the depth stopper – see

ﬁ gure [12 c].

Transport lever disassembly

1. Press the button [13-1] and concurrently

pull it out– see ﬁ gure [13a].

2. Remove the released button [13-1] (ﬁ g-

ure [13 b]) with the transport lever [13-2]

and the spring [13-3] from the slides

(ﬁ gure [13 c]).

Clean individual parts, replace defective or

worn parts, and assemble in the opposite

sequence.

CAUTION

During reassembly of the transport

lever into the slides, pay due care to

correct ﬁ tting of the spring [13-3] in

the transport lever. Incorrect assem-

bly may result in dysfunction of the

belt transport.

Acoustic warning signal

Acoustic warning signals sound and the ma-

chine switches off in the following operating

states:

peep

- Battery ﬂ at or machine

overloaded

• Change the battery

pack.

• Place the machine under

reduced stress.

peep peep

- Machine is overheating

• You must allow the

machine to cool before

using again.

peep peep peep

- LiIon battery pack is

faulty or has overheated.

• Once the battery pack

has cooled, perform a

functional check using

the charger.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool DWC 18-2500 DEC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool DWC 18-2500 DEC Manual

Product: