Manual Protool DWC 18-2500 DEC (page 18 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

490654

Zoom out

Zoom in

1/132

into machine anti-clockwise operation.

In order to start the power tool, press the

switch [1-2]. The switch MAN/AUTO [1-4]

is in any position.

Use the switch [1-2] to gradually regulate

the speed.

CAUTION

If the forward / reverse switch [1-3]

is set to anti-clockwise operation, the

screwdriver can be started only by

pressing the switch [1-2] – without

additional pressure on the bit!

CAUTION

It is not necessary to remove the

depth stopper in order to unscrew

screws!

8.2 Depth stopper

Turning the depth stopper sets the screwing

depth – see ﬁ gure [5]. The setting accuracy

is approx ± 0.1 mm.

Anti-clockwise rotation = screws are in-

serted deeper

Clockwise rotation = screws are in-

serted to lower

depth

Upon setting the depth, set some screws

to test and adjust the depth.

Depth stopper assembly

Fit the depth stopper [4-1] on the gear box

[4-5], until it engages in the groove.

Depth stopper disassembly

Remove the depth stopper from the gear

box by pulling it.

8.3 Hook and clip

Use the clip [6-1] to temporarily attach the

screwdriver on the working clothing – it can

be attached by means of a screw [6-2] to

the left or right of the power tool, and it is

suitable for right and left handed people –

see ﬁ gure [6].

The screwdriver is equipped with a hook

[7-1], which is used for occasional machine

suspension. It can be attached to the left

or right of the power tool, by means of a

screw [7-2] – see ﬁ gure [7].

8.4 Auto feed attachment

The auto feed attachment enables to work

continuously, without unnecessary delays.

Fitting the auto feed attachment

At ﬁ rst remove the depth stopper [4-1], bit

holder [4-2] and bit, as speciﬁ ed in point 7.

Set the switch [1-4] into MAN position.

Push the long bit [8-1] completely to the

hexagonal spindle opening [4-4].

Then ﬁ t the auto feed attachment on the

gear box. Push the attachment until it en-

gages in the groove of the gear box.

The attachment can be mounted at 30°

steps.

Removing the auto feed attachment

Use power to carefully pull the attachment

from the gear box.

Setting the screw length

Press button [9-1] to remove and insert the

depth stopper [9-2] and set the required

screw length. Read the set screw length on

the stopper sides [9-3].

Inserting collated screw strips

Pull the collated screws [10-3] through the

bottom guiding of the attachment, then

push the strip through the second guid-

ing until it engages in the working position.

Pull the belt slightly to make sure that it is

safely ﬁ tted. Make sure that the ﬁ rst screw

is in the screwing axes – see ﬁ gure [10].

Use the wheel [10-1] to set the required

screwing depth. Turn to the right for in-

serting the screws deeper, and to the left

to screw to lower depth. The actual setting

position is visible on the presetting indica-

tor [10-2].

Upon setting, set some screws for test-

ing and use the wheel [10-1] to adjust the

depth, if required. Each setting change

complies with the stopper shift o ± 0.1 mm.

► We recommend to screw in automatic

mode – see point 8.1 b).

Removing the collated screws

Pull upwards to remove the belt (ﬁ gure

[11]

) or press the transport lever and

concurrently pull the belt downwards (ﬁ g-

ure [11]

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool DWC 18-2500 DEC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool DWC 18-2500 DEC Manual

Product: