Manual Protool AGP 230-26 R (page 18 of 148) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

490682

Zoom out

Zoom in

1/148

5.6 Additional safety instruc-

tions for grinding with a

wire brush

Safety warning speciﬁ c to grinding

with a wire brush

a) Note that during normal activity wire

bristles are ﬂ ung off. Do not overload

the wires with excessive pressure on

the brush. The wire bristles may easily

penetrate light clothing and/or skin.

b) If a protective cover is recommend-

ed for grinding with a wire brush,

ensure that there is no contact be-

tween the wire disc or brush and the

protective cover. The wire disc or cover

may during work activity, through the

effect of load and centrifugal forces, in-

crease its diameter.

5.7 Turner safety instructions

► The storage and handling of grinding

wheels must be carried out in compliance

with the manufacturer’s instructions.

► Make sure that the pliable washers of the

grinding tool arte installed if such wash-

ers are supplied with the tool and their

use is required.

► Do not use separated reduction housings

or adaptors to adjust grinding wheels

with larger holes.

► In the case of equipment designed for use

with an internal-threaded wheel make

sure that the thread in the wheel is long

enough with respect to the length of the

spindle.

► The machine may not be used in damp

and wet spaces, outdoor when it is rainy,

foggy or snowy or in the explosive envi-

ronment.

► Before use always inspect the ﬂ exible

lead and the plug. Have the defects re-

paired by a specialist repair shop.

► Outside the premise use only approved

extension leads and cable connections.

► It is not allowed to grind or cut asbestos

materials.

► Apply the machine to the material only

when switched on.

► Do not carry the machine by the lead.

► For safety reason the workpiece must be

clamped in a vice or a clamping jig. In

such a way the workpiece can be oper-

ated by both hands.

► The ﬂ exible lead plug only connect into

the socket when the machine is off.

► Do not use cutting wheels for grinding.

► Before replacing the grinding wheel or

during other operations always discon-

nect the plug from the socket (power

supply).

► When cutting or dividing stone or ma-

sonry it is necessary to use a guide rail

or a suction cover.

► Do not work on a ladder.

► Persons under 16 are not allowed to work

with the grinding machine.

5.8 Service

a) Have your power tool serviced by a

qualiﬁ ed repair person using only

identical replacement parts. This will

ensure that the safety of the power tool

is maintained.

5.9 Residual risk

Although this information sheet and the

operating manuals for our electrical tools

contain extensive instructions on safe work-

ing with electrical tools, every electrical tool

involves certain residual risks that cannot

be completely prevented through safety

mechanisms. Therefore, electrical tools

must always be operated with the neces-

sary caution.

5.10 Emission levels

Levels determined in accordance with

EN 60 745 are typically:

Sound pressure level L

= 91 dB (A)

Noise level L

= 102 dB (A)

Uncertainty K = 3 dB

CAUTION

Operating noise

Damage to hearing

► Use ear protection!

Vibration emission value a

(vector sum for

three directions) and uncertainty K meas-

ured in accordance with EN 60 745:

= 4.5 m/s

Uncertainty K = 1.5 m/s

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protool AGP 230-26 R in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protool AGP 230-26 R Manual

Product: