b. START/PAUSE/ RESET:
1. To start or pause exercising.
2. Hold this button for 2 seconds can enter initial mode & reset all value to
zero.
c. ♁ ▲ :
1. During the pause mode, Select Program or increase the setting value of
TIME, COUNT, DISTANCE, CALORIES, PULSE in the heart rate
control program 8, and PROGRAM PROFILE in the User setting program.
2. During the exercise mode, Press this button to increase the load level.
d. \▼ :
1. During the pause mode, Select Program or decrease the setting value of
TIME, COUNT, DISTANCE, CALORIES, PULSE in the heart rate
control program 8, and PROGRAM PROFILE in the User setting program.
2. During the exercise mode, Press this button to decrease the load level.
e. PULSE RECOVERY:
1. Press this button going into pulse recovery detecting.
F1.0 = Excellent F2.0 = Good F3.0 = Fair F4.0 = below average
F5.0 = No Good F6.0 = Poor
C. FUNCTIONS:
TIME:
Exercise time will be shown on the display when exercising. If there is no signal is
detected within 4 seconds, it will reset zero.
Count up: Without setting the time value, the monitor will count up the time from
0:00 to 99:59.
Count down: Setting the exercise time, the monitor will count down from your setting
values. Once reach setting value, monitor will produce bi sounds, and then the value
of time becomes counting up form 0:00.
Count:
Count will be shown on the display when exercising. If there is no signal is detected
within 4 seconds, it will reset zero.
Count up: Without setting the count value, the monitor will count up the count from 0
to 9999.
Count down: Setting the exercise time, the monitor will count down from your setting
values. Once reach setting value, monitor will produce bi sounds, and then the value
of count becomes counting up form 0.
CALORIE
The calories burned will be displayed on the window. Its scope is 0.0-999kcal.
Count up: Without setting the calorie value, the monitor will count up the count from
0.0 to 999.
