Manual Protector AS-8000 (page 27 of 88) (English, German, Dutch, French)

738854

Zoom out

Zoom in

1/88

3. The next step is to connect the mains supply to the

appropriate terminals of the AS8000 central unit.

Please take note of the correct connection of the

protective conductor.

4. Fasten the cover of the connection terminals and switch

on the mains voltage again. Following an internal self-

test the power LED will light up green and operational

readiness is signalled with a beep. For further

information on ﬂashing and beeping patterns

please see the status and error reports.

Installation instructions for the

window transmitter

AS-F20 and the magnet (see ﬁgures 9 and 14)

Some points need to be explained and followed in order

to install the window transmitter and the magnet to

the top window frame and to the window casements.

The distance around all sides of the casing parts must

be less than 7 mm and the minimum opening on the

window (table 1) must be achieved. Please use the

included packing parts (U) in order to adjust the height

of the magnet.

NOTE

The window transmitter should not be installed

directly on a metal window frame as this can

reduce ranges.

INSTALLATION

We recommend having the device installed by an

installation technician and heating engineer or by an

electrical installation technician. Correct installation

guarantees the long term, safe operation of the

exhaust air controller. The regional chimney sweep

can and should carry out a function test.

Installation instructions

AS-8000 central unit (receiver) (see ﬁgure 2)

The AS-8000 central unit is suitable only for use in dry

indoor spaces. It must be kept stationary and installed

and operated in a suitable ﬂush-mount or surface

mount casing.

Please proceed as follows to install the receiver:

1. The installation must be undertaken only once the

device is disconnected and volt-free. In order to ensure

that, disconnect from the electric mains supply line by

switching off or unscrewing the corresponding fuse.

Also switch off the corresponding fault-current circuit

breaker, so that the mains supply line is separated

from the mains voltage on all poles. Safeguard it

from an unauthorized switch-on and ensure that the

corresponding mains supply line remains switched off.

2. Connect the supply cable of the exhaust air unit as

shown in connection example 1 or 2. Ensure that the

protective earth conductor is connected correctly!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protector AS-8000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protector AS-8000 Manual

Product: