738854
26
Zoom out
Zoom in
Previous page
1/88
Next page
WIRELESS EXHAUST AIR CONTROLLER AS-8000
Thank you for purchasing the PROTECTOR wireless
exhaust air controller in the AS-8000 series.
The operating instructions are a constituent part of the
device. They contain important notes on safety, use
and disposal. Familiarise yourself with all the operating
and safety notes before using the device. Only use it as
described and for the given areas of use. Pass on all
the documentation if you transfer the device to a
third party.
GENERAL
The wireless exhaust air controller AS-8020/30/40 is
used in connection with exhaust air systems such as an
extractor hood, in rooms with access to an open fire,
gas heater, open fireplace, tiled stove, wood stove, oil
stove or similar.
Air is transported out of the room when using an
exhaust air system, e.g. an extractor hood or exhaust
air ventilators and this can cause negative pressure in
closed rooms.
When combustible material is burned in an open fire
this creates odourless and invisible carbon dioxide and
carbon monoxide gases. These gases can enter the
room from the fire when air is being removed with
the help of an exhaust air system and this can lead to
life-threatening poisoning in people in that room.
The exhaust air controller AS-8020/30/40 ensures
that an exhaust air system can only be operated when
fresh air is being supplied by an air supply system, e.g.
an open window, sufficient replenishment of fresh air.
The exhaust air controller AS-8020/30/40 only
switches the exhaust air device on if pressure
equalisation is ensured. The plug guard connects the
plug on the exhaust air device with the exhaust air
controller and prevents inadvertent connection of the
exhaust air device to an unprotected power source.
NOTE
The teaching of the sensors (window transmitter,
stove transmitter and roller shutter transmitter) in
connection with the central unit must be carried out
or tested before initial operation of the exhaust air
controller. If the exhaust air controller is installed
incompletely (e.g. without the relevant plug guard
in figure S) or if it has been taught incorrectly
before being connected to the socket a protect
function will be activated and it will not be possible
to operate the exhaust air system.
CAUTION!
The roller shutter must be open when the exhaust
air device is in use or it must be fitted with an
additional roller shutter sensor AS-R40. If the roller
shutter is closed it is not possible to ensure sufficient
replenishment of fresh air.
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protector AS-8000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protector AS-8000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info