Manual Protector AS-7000 (page 35 of 88) (English, German, Dutch, French)

738868

Zoom out

Zoom in

1/88

The relay will only switch if:

With window contact only:

Window open

With window and stove contact:

Stove off

Stove on and window open

With window and roller shutter and stove contact:

Stove off

Stove on, window and roller shutter open

Factory settings on the central unit

Press the reset/learn button and hold it down for 10 s

in order to delete all the learned transmitters. The reset

routine is shown with a single beep as an acoustic signal

and functions correctly if all the LEDs are ﬂashing green.

If only the power LED is ﬂashing green then the table

deﬁnitely needs to be deleted, which is initiated by

keeping the reset button depressed again. The central

unit will respond with 2 acoustic signals, a pause and

another 2 acoustic signals and the power LED will be

reset to being lit constantly.

Release the reset button again after these signals. The

sensor table and the corresponding ﬂash memory in

the device have now been deleted. This is shown by

the constant lighting of the power LED. None of the

corresponding sensor LEDs should be lit.

Encoding

The following steps are necessary to teach the

relevant sensors:

Pairing can now be initiated by brieﬂy pressing the

reset/learn button. This is shown by a short acoustic

signal and all the LEDs ﬂashing green. If the procedure

has not been interrupted after 7 seconds then learning

can begin. (However if this happens then only press the

button once the routine is back in default condition).

The transmitters are now paired individually.

The set button on each sensor is activated and this is

answered by the sensor by ﬂashing red-green.

(The same LED signal is also displayed when the

SET routing is running)

After approx. 10 seconds the LEDs on the central

unit display which sensor type was taught and one or

several acoustic signals will sound again in accordance

with the number of sensors that have already

been taught.

Caution: A logical AND association of the sensors is

created if one sensor is ﬁtted with the AND jumper

and the following must be an OR Sensor. Completing

the pairing process with an AND or a subsequent stove

sensor will produce an ERROR (three short, three long,

three short) and returns the central unit to the

factory reset.

AS 7000_1.Vers. 2017 Manual 3xAA@150x180.indd 35 07.06.17 18:37

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protector AS-7000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protector AS-7000 Manual

Product: