738868
36
Zoom out
Zoom in
Previous page
1/88
Next page
If this has happened a further sensor can be taught or
maintained until the set routine is over after approx.
50 seconds. This is shown by 2 consecutive acoustic
triple signals and a change of the power LED to
constant green and the corresponding sensor LED to
the relevant status.
The exhaust system should now be functional.
When operating the system please note that the
window and roller shutter sensors have transferred the
status if they flash green twice after approx. 5 seconds.
If the relevant sensor flashes red twice then the status
was not transferred sufficiently and is sent in cycles
again every 50 seconds until the status is accepted and
confirmed as described above.
For the stove sensor the status is requested every
200 seconds. If the status of the stove sensor changes
then it is updated to the central unit in accordance with
the routine described above.
The central unit decides on the release of the relay,
which sensors were taught and what condition
they are in.
System function test
(Example AS-7020/30/40 and AS-F20
window transmitter)
Switch the exhaust device on and open the window.
The green LED flashes briefly and the green LED on the
receiver is now on constantly. The exhaust device is
switched on.
Close the window and the exhaust device will switch
off. The red LED on the transmitter flashes and the red
LED on the receiver is now on constantly. The exhaust
device is switched off.
Your system is ready for operation once this function
test has been completed. Repeat this function test at
regular intervals for your own safety.
EN
36
AS 7000_1.Vers. 2017 Manual 3xAA@150x180.indd 36 07.06.17 18:37
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protector AS-7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protector AS-7000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info