Manual Protector AS-7000 (page 32 of 88) (English, German, Dutch, French)

738868

Zoom out

Zoom in

1/88

NOTE

Please ensure that you lay the battery in the

window transmitter on top of the metal tab and

not below it.

3. Press the upper casing section onto the lower

casing section.

Attaching the magnet

Fix the magnet in place in accordance with ﬁgure 4.

Open and close the roller shutter once after attachment.

The transmitter should ﬂash at least once for each

activation. Proceed as follows to attach the magnet:

4. Attach the lower magnet casing section and the lower

sensor casing section in the correct position using the

included double-sided sticky pad.

Alternatively there is a prepared hole in the lower casing

sections through which the magnet and the sensor can

be screwed to the window frame.

5. Drill a 5 mm hole through the window frame and feed

the sensor cable to the outside into the lower casing

section at the correct point.

6. Insert the magnet and the sensor and check the

functioning of the roller shutter sensor.

CAUTION!

The distance between the roller shutter sensor and

the magnet may not exceed 7 mm!

7. Open the roller shutter again. The green LED (OPEN)should

ﬂash brieﬂy if the sensor has been installed correctly.

8. Now close the roller shutter. The red LED (CLOSED) will

ﬂash brieﬂy.

9. After all functions have been successfully tested the

transmitter, sensor and magnet must be screwed to the

window/window frame. There is a prepared hole in the

lower casing section of the roller shutter transmitter and

in the lower casing of the magnet and sensor. This

allows you to screw the roller shutter transmitter,

magnet and sensor to the window/window frame.

This prevents them from falling down unintentionally

during operation.

10. Close the casing on the transmitter, the magnet and the

sensor with the correct cover.

Attachment points:

• It must be ensured that the gap between the magnet

and the sensor is less than 7 mm when the roller

shutter is open.

• The contact must be attached to the top or side window

frame and casement in such a way that the distance

between the two casing sections is less than 6 mm

when the window is closed! Use the included packing

(U) to make these adjustments.

• We recommend attaching the contact and the magnet

with the double-sided sticky tape before the ﬁnal

attachment and only to screw them in place at the end.

AS 7000_1.Vers. 2017 Manual 3xAA@150x180.indd 32 07.06.17 18:37

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Protector AS-7000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Protector AS-7000 Manual

Product: