738849

Protector AS-410 Manual

17
Zoom out
Zoom in
Previous page
1/24
Next page
EN
17
TEACH IN FURTHER
RADIO TRANSMITTERS
(MAX. 8 PIECES)
NOTE
Further radio transmitters can only be used in
the “OR” function! I.e. window “1” OR window
“2” (3-8) can be opened to activate exhaust
air control.
1. Insert a battery (CR 2032) with the correct polarity
into the NEW radio transmitter to be taught in and
slide the switch (7) in position “I” to switch on the
radio transmitter. The LED (5) on the radio transmit-
ter lights up briefly.
2. Press the button (4) on the radio receiver for
3 seconds. The LED (4) starts flashing and the radio
receiver is in learning mode for 30 seconds. During
this time, another radio transmitter can be taught in
to the radio receiver.
3. Actuate the radio transmitter within these
30 seconds by holding the magnet (3) once against
the radio transmitter (2) at the height of the arrow
mark and removing it again. The LED (5) on the radio
transmitter lights up. At the radio receiver, the LED (4)
stops flashing and the teach-in process is completed.
4. Repeat steps 1), 2) and 3) for each individual
radio transmitter.
5. Once a maximum of 8 radio transmitters had been
taught in, no further transmitters can be added
DELETE INDIVIDUAL OR ALL
RADIO TRANSMITTERS
(MAX. 8 TRANSMITTERS)
Deleting a single RADIO TRANSMITTER
1. Press the button (4) on the radio receiver for
3 seconds. The LED (4) starts flashing.
2. Actuate the radio transmitter to be deleted by
holding the magnet (3) once against the radio
transmitter (2) at the height of the arrow mark
and removing it again. At the radio receiver, the
LED (4) stops flashing and the deletion process
for the individual radio transmitter is completed.
Delete all RADIO TRANSMITTERS
(factory setting)
1. Press the button (4) on the radio receiver for
3 seconds. The LED (4) starts flashing.
2. Press the button (4) again for 3 seconds. At the
radio receiver, the LED (4) stops flashing and the
deletion process for all radio transmitters
is completed.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Protector AS-410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Protector AS-410 in the language / languages: English, German as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info