491322
48
Zoom out
Zoom in
Previous page
1/84
Next page
Wok burner
To acces the large nozlle of the wok burner, 2. Remove the control knobs by* :
the complete under construction of the i- - first removing the black plastic part [1].
Cooking appliance must be removed first. -unscrewing the lock-screw [2].
- removing the button [3] from the shaft.
* newer knob versions can be removed directly
D o a s f ol lo ws , a c co rd in g t o
attention! do not pull on the knobs
undermentioned steps, at the same time
unnecessarily, this could cause
you can replace the small nozzles on the
permanent damage to the gas tap!
gas taps:
1. Remove pan supports, and all
r em o v a bl e b u r ne r c o m p on e n ts
[10,11,12,13].
3. Remove the screws which connect the
burner housings to the worktop and
remove the cover rings [only 4mm
stainless steel worktops].
4. Close the gas main supply and
disconnect the i-Cooking appliance from
the gas supply.
5 Remove the screws from the underside
of the housing, which releases the
complete construction, including the
burner housings, from the worktop.
6. Put the housing on an even, stable
underground before replacing the nozzles.
EN 21 Installation
9
10
11
12
13
1
2
3
5.3 Changing the type of gas
If the appliance is connected to a different
gas-type, the small and large nozzles
inside the gas-tap and burners must be
replaced.
Use nozzles according to undermentioned
scheme.[bold printed means this nozzle
is a different one than the standard
configuration]
Large nozzle | simmer, standard, power
burner
Disconnect the electrical tension from
the i-Cooking appliance. Switch off the
fuse of the house installation, or
remove the power plug from the power
socket.
1. Remove the pan support, burner cover
and spiral burner itself [17,18,19].
2. Unsrew the large nozzle with a fitting
tool [24].
3. Replace the nozzle by the correct one
[see scheme].
EN 20 Installation
17
18
19
24
burner large small
natural gas Ømm Ømm
G25/25
wok inner ring 0.46 X 0.38 38
wok outer ring 1.75 175 0.70 70
power burner 1.25 125 0.60 60
standard burner 0.95 95 0.50 50
simmer burner 0.75 75 0.45 45
burner large small
natural gas Ømm Ømm
G20/20
wok inner ring 0.46 X 0.38 38
wok outer ring 1.72 172 0.70 70
power burner 1.22 122 0.60 60
standard burner 0.90 90 0.50 50
simmer burner 0.75 75 0.45 45
burner large small
natural gas Ømm Ømm
G25/20
wok inner ring 0.55 55 0.38 38
wok outer ring 1.90 190 0.70 70
power burner 1.30 130 0.60 60
standard burner 0.98 98 0.50 50
simmer burner 0.80 80 0.45 45
burner large small
bottled gas Ømm Ømm
G30/30
wok inner ring 0.30 C 0.25 25
wok outer ring 1.20 120 0.46 46
power burner 0.77 77 0.40 40
standard burner 0.67 67 0.33 33
simmer burner 0.54 54 0.30 30
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prosolo i-Cooking at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prosolo i-Cooking in the language / languages: Dutch as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info