491322
47
Zoom out
Zoom in
Previous page
1/84
Next page
The gas-tubes must be installed in such a explained in the following chapter.
way that these cannot be damaged by the
heat, generated by the appliance itself,
when it is in use. Particularly the gas-
tubes and gas-tap may not get in contact
with hot combustion gasses.
The gas-hose and connection cable may
not get in contact with parts of the
appliance which might get hot, because
otherwise these could get damaged.
Flexible connections must be placed in
such a way, that they cannot get in
contact with moving parts of the kitchen,
for example hinges, drawers or doors.
Also, the connection may not be exposed
to mechanical tensions.
Finally, check if the gas connections are
airtight so there is no gas leakage.
This appliance has a R½ 90° gas
connection.
The i-Cooking application is suitable for
natural and bottled gas. This appliance
meets the EN 30-1-1:2008 requirements.
After production, this appliance was
adjusted to natural gas [see type plate for
specification]. For adjustment to use with
liquid gas, like butane and propane,
suitable gas nozzles can be supplied
optionally. Consult your dealer, supplier or
the ABK InnoVent service department. The
adjustment to another gas type is
burner max. min.
natural gas kW. kW.
G25/25
wok burner 5.42 0.18
power burner 2.93 0.59
standard burner 1.67 0.44
simmer burner 0.96 0.34
burner max. min.
natural gas kW. kW.
G25/20
wok burner 5.76 0.17
power burner 2.93 0.51
standard burner 1.56 0.45
simmer burner 1.00 0.30
EN 19 Installation
burner max. min.
natural gas kW. kW.
G20/20
wok burner 5.82 0.20
power burner 2.98 0.64
standard burner 1.77 0.48
simmer burner 1.04 0.37
burner max. min.
bottled gas kW. kW.
G30/30
wok burner
power burner 2.36 0.52
standard burner 1.66 0.45
simmer burner 1.25 0.35
6,15 0.20
Automatic fuse machine | Automatic
5.2 Gas connection
switch, at least type B or C: switch the
The i-Cooking appliance may only be fitted
tumbler switch from 1 [on] to 0 [off].
or modified for different gas types by a
Earth leakage contact breaker | Turn the
certified fitter. The fitter is responsible for
main switch from 1 [0n] to 0 [off] or press
a proper functioning of the appliance, on
the test button.
the location where it is in use.
Attention: Make sure that the net
The gas connection must be positioned in
tension cannot accidentally be
such as way that it can be connected to
switched on again.
the gas supply, inside or outside the
cabinet. The gas tap must be visible and
Replacing the connection cable
accessible, eventually after opening a
The connection cable may only be
door of the kitchen cabinet.
replaced by an original ABK InnoVent
cable. This cable may only be replaced by
Ask your local gas company which type of
ABK InnoVent, or by a fitter or certified
gas you get supplied and compare this
electrician, appointed by ABK InnoVent.
with the data on the type plate.
The applicable rated loads can be found on
the type plate on the appliance.
The i-Cooking appliance must be installed
to the gas supply according to all current
and local requirements and guide lines.
The appliance can be connected with a
permanent or removable connection. In
case of a removable connection, the
safety adaptor and safety gas hose with
connector according to DIN 3383 part 1,
must be used.
EN 18 Installation
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prosolo i-Cooking at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prosolo i-Cooking in the language / languages: Dutch as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info