491322

Prosolo i-Cooking Manual

50
Zoom out
Zoom in
Previous page
1/84
Next page
Small nozzles
Also the small nozzles on the gas taps
must be replaced.
Power, standard and simmer burner
1. First remove the control knob extension
shaft and “E“-clips from the gas tap, then
remove the spark igniter [34]. Now the
nozzles are accessible.
2. Remove the nozzle with a screwdriver
and replace it by the new one [35], see
After the replacement
also table with required dimensions.
-Replace all tap components in reverse
order.
-Check all connections for gas leakage.
-Replace the housing under the worktop.
-Replace the burner parts in the right order.
-Replace the control knobs again over the
extension shafts. In the height of the shaft
there is sufficient space to push the button
down for ignition and to unlock the child
safetly lock.
-Check if all burners function properly.
-Attach the new supplied sticker,
indicating the adjusted gas system, over
Wok burner
the already existing sticker.
1. First remove the control knob extension
shaft and “E“-clip from the gas taps, then
remove the spark igniter [34]. Now the
nozzles are accessible.
2. Remove the nozzles with a screwdriver
and replace it by the new ones, see also
table with required dimensions. Attention:
on this gas tap, two nozzles must be
replaced! One big one [37] and one small
on e [ 36], se e a ga in ta ble f or
specifications.
EN 23 Installation
34
35
34
37
36
EN 22 Installation
7. Remove the nozzle [25] with a size 10 9. Remove the screw [27] from its
picklock, the container [26] can be container [28] with a size 8 picklock.
secured with a size 13 picklock. 10. Remove the container [28] itself with a
size 12 picklock.
11. Replace the nozzle [29] by the new
one.
12. Make sure the distance between part
30 and 31 remains the same, by adjusting
the movable part to exactly 4.1mm if
necessary. Also check that the flat parts
cover the two holes.
13. Refit all components again in the
opposite order.
Check the primary air supply
8. Replace the nozzle with the new one in
Check the distance of the primary air
the same way.
supply [X], this must remain the same as
undermentioned. If necessary, the
Wok burner | inner burner
distance can be modified by moving the
tube part [33]. To move this part, loosen
the screw [32] on top.
Natural gas X=8mm
Bottled gas X=8mm
25
26
27
28
2930
31
4.1mm
32
33
x
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Prosolo i-Cooking at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Prosolo i-Cooking in the language / languages: Dutch as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info