Manual Prophete 0511 (page 6 of 16) (English, German, Dutch, French, Italian, Polish)

779729

Zoom out

Zoom in

1/16

taBle oF contents

1. scope

2. saFety and Maintenance

2.1 Safety instructions

2.2 Repairs

2.3 Operating environment conditions

2.4 Ambient temperature

2.5 Electromagnetic compatibility

2.6 Battery operation

2.7 Disposal

2.7.1 Battery disposal

2.7.2 Bicycle computer disposal

2.7.3 Packaging disposal

2.8 Maintenance

2.9 Cleaning and care

2.10 Storage

2.11 Notes to these operating instructions

2.12 Scope of delivery

3. display and Function keys

4. asseMBly

4.1 Bicycle computer mount and bicycle computer

4.2 Mounting the sensor

5. initial operation

5.1 Switchingonthebicyclecomputerforthersttime

5.2 Setting the wheel size

5.3 Selecting KM/H Miles

5.4 Setting the inspection interval

5.5 Setting the 12/24-hour display

5.6 Setting the clock

5.7 Bicycle computer check

5.8 New start/Reset

5.9 Automatic start/stop

6. Modes/Functions

6.1 Resetting the route data (DST, TM, AVS) to zero

6.2 Resetting the maximum speed (MXS) to zero

6.3 Manual entry of total kilometres

7. Battery replaceMent

7.1 Bicycle computer

8. declaration oF conForMity

9. description oF Fault

10. Warranty provisions

1. scope

This bicycle computer has been solely designed for use as a bicycle computer.

Bicycle computers provide information about the speed and covered distances.

Any other use than that described in these operating instructions is not permitted

and can cause damage and injuries. We shall not assume liability for damage

due to improper use. You will nd further notes and explanations in the operating

instructions.

2. saFety and Maintenance

2.1 Safetyinstructions

Please read this chapter carefully and comply with all given notes. This will

ensure reliable operation and the long service life of your bicycle computer.

Please keep the packaging and the operating instructions in a safe place in order

to pass them on to a new owner should you sell the bicycle computer. Never

open the housing of the bicycle computer and the sensor, as it does not contain

any parts requiring maintenance (opening the battery compartment to insert

or replace the batteries, see Point 7, Battery replacement, is the exception). Do

not place any objects on the bicycle computer and do not exert pressure on the

display. This could otherwise damage the display. Do not touch the display with

square-edged objects to avoid damage.

2.2 Repairs

In case of necessary repairs or a technical problem, please consult our Service

Centre. You will nd the address in Point 10, Warranty provisions.

2.3 Operatingenvironmentconditions

The bicycle computer is splash water protected. Make sure your bicycle computer

is not exposed to moisture or continuous high humidity and avoid dust, heat and

extended periods of direct sunlight. Non-compliance with these notes can cause

faults or damage to the bicycle computer.

2.4 Ambient temperature

The bicycle computer can be permanently operated and stored at ambient

temperatures of -10°C to 50°C.

2.5 Electromagnetic compatibility

If possible, do not use the bicycle computer in close proximity to, e.g. computers,

printers, television sets, mobile phones or radios, as devices with strong EMC

radiation can cause interference.

2.6 Battery operation

Your bicycle computer is operated by a 3V/CR2032 battery. In the following text

you will nd a few notes on how to handle batteries:

Replace the battery only with an equivalent battery type. Batteries may not be

charged or reactivated using other means, may not be taken apart, thrown into

a re or short-circuited. Always keep the battery out of the reach of children.

Batteries can be fatal if swallowed. Therefore, keep the battery and the bicycle

computer out of reach of small children. Seek medical assistance immediately if

a battery was swallowed. If required, use a slightly moist cloth to clean the device

and battery contacts and dry thoroughly before inserting the batteries. Be careful

with leaked batteries! Avoid contact with skin, eyes and mucous membranes!

If contact was made with battery uid, immediately rinse the affected spot with

plenty of water and consult your doctor directly. Batteries cannot tolerate heat.

Make sure to prevent the computer and its inserted batteries from becoming

too hot. Disregarding these notes can lead to damage and even cause the

batteries to explode. Temperatures below 0°C can have a negative effect on the

battery life. You will nd information on how to replace the batteries in Point 7,

Battery replacement.

Note: Please position the bicycle computer so that it is not exposed to

extreme heat or cold. Extreme cold weakens the batteries and thus the

transmission signal. (see 2.4)

2.7 Disposal

2.7.1 Battery disposal

Batteries are hazardous waste. To properly dispose of the batteries, stores selling

batteries and municipal collection points provide corresponding containers.

2.7.2 Bicycle computer disposal

If you would like to get rid of your bicycle computer, dispose of it as per current

regulations. Information can be obtained from the municipal ofce.

2.7.3 Packaging disposal

Dispose of the bicycle computer packaging as per current regulations. Informa-

tion can be obtained from the municipal ofce.

2.8 Maintenance

Caution! There are no parts that need to be maintained or cleaned inside

the housing of the bicycle computer.

2.9 Cleaningandcare

Only clean the bicycle cyclometer with a soft, moistened, lint-free cloth. Do

not use any solvents, corrosive or gaseous cleansing agents. Make sure that

water droplets do not remain on the display. Water can cause permanent

discolouration. Do not expose the bicycle computer display to erce sunlight or

ultraviolet radiation.

2.10 Storage

Remove the battery if you are not going to use the bicycle computer for an ex-

tended period of time. To store the bicycle computer, please observe the notes in

Point 2.3 Operating environment conditions, and Point 2.4 Ambient temperature.

The bicycle computer should be stored securely. Avoid high temperatures (e.g.

direct sunlight) and a permanently moist environment.

tautly or tears when turning the handlebar, and make sure that it does not

become entangled in the front-wheel spokes while riding the bicycle. If necessary,

x in place using the cable tie (G). Place the magnet on one of the front-wheel

spokes and attach with screw (E). Ensure that the magnet is aligned to the

sensor – with 2 mm clearance as depicted in the next gure.

5. initial operation

We recommend carefully reading the operating instructions rst before using

the bicycle computer.

5.1 Switchingonthebicyclecomputerforthersttime

A few settings must be made before the bicycle computer can be used for the rst

time. Press the LEFT or RIGHT key to switch on the bicycle computer. The rst item

to appear is the entry for the wheel size “2124”.

3. display and Function keys

4. asseMBly

4.1 Bicycle computer mount and bicycle computer

Place the securing aid (D) under the bicycle computer mount (A) on the handlebar

and attach using the cable tie (G). Slide the bicycle computer into the bicycle

computer mount from the front until it clicks into place. Then adjust the bicycle

computer (by turning) to the angle of view required. To remove the bicycle computer,

press the locking mechanism down.

4.2 Mountingthesensor

Place the anti-slip pad (C) under the sensor (B) and fasten everything in place –

using the cable tie (G) – underneath the bicycle computer on the fork, as depicted

in the following gure. Ensure that the cable is placed so that is not pulled too

Clearance to magnet 2 mm

2.11 Notes to these operating instructions

We have structured the operating instructions for this bicycle computer so that

you can consult the table of contents to nd the required, relevant information

at any time. If you have any further questions, you can also contact us at the

following address:

Service address: Prophete GmbH u. Co. KG

Lindenstraße 50

33378 Rheda-Wiedenbrück

+49 (0) 5242 4108-59

Email address: service@prophete.net

2.12 Scopeofdelivery

C D

CR2032

Bicycle computer

Issue 11/2014

LEFT key RIGHT key

A Bicycle computer mount

B Sensor

C Anti-slip pad

D Securing aid

E Magnet with screw

F 3 V battery CR2032

G Cable tie

BAFahrradPC0511_DE-FR-GB-IT-NL-HU-RO-PL.indb 2 11.11.2014 15:41:52

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Prophete 0511 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 5.21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Prophete 0511 Manual

Product: