Manual Proficare GKH 3118 (page 18 of 90) (English, German, Dutch, French, Italian, Polish, Spanish)

814770

Zoom out

Zoom in

1/90

PC-GKH3118_IM 01.09.23

Weekly Timer

• To use the weekly timer, you must rst set the current

time. The current time must be set when the appliance

is rst put into operation and every time the appliance is

disconnected from the mains.

• The days of the week are indicated by the following digits

in the display:

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

Set the Current Time:

1. Select the weekly mode with the button . The display

shows

2. Press the button . The starts ashing.

3. Select the current day of the week with the or but-

ton. Conrm your entry with the button . When the

time is displayed, the hours ( ) start ashing.

4. Set the current hour with the or button. Conrm

your entry with the button . When the time is dis-

played, the minutes ( ) start ashing.

5. Set the current minutes with the button or .

6. Wait until the minutes stop ashing. The settings are

accepted. In the hour bar, the upper and lower bars of

the current hour ash.

Program the Weekly Timer

• The operating modes determine when the appliance is to

operate in which operating mode.

• Each line of the hour bar ( 8

012 16 20 ) represents one hour.

The appliance is activated for the selected full hour.

• The upper bar represents the full power of the appliance,

the lower bar represents half the power. If the bars of

the hour bar are not lit, the appliance is working in the

anti-frost function.

• The appliance must remain switched on in the “Weekly

Timer” operating mode for the function to work. To avoid

being disturbed by the display illumination, it can be

switched off as described above.

• If the appliance is in the activated hour, the set temper-

ature can be displayed or changed with the or

button.

• Make sure that you do not maintain too long between

programming steps. The programming mode is automati-

cally terminated after 5 seconds!

1. If not already done, set the time and temperature as

described on page 17.

- Individual temperatures cannot be set during pro-

gramming. The temperature from the default settings

(page 17) are adopted.

2. Select the weekly timer mode with the button . In the

hour bar, the upper and lower bars of the current hour

ash.

3. Press the button . The current day

of the week starts

ashing in the display.

4. Select the day of the week to be programmed (

–

) with the button .

5. Select the anti-frost function ( ) with the button .

6. Go to the desired start time with the button or .

7. Use the button to select whether the appliance should

operate with full power ( ) or half power ( )

8. Move to the desired stop time with the or button.

The bars become visible accordingly.

9. Wait until the

stops ashing. The settings are ac-

cepted. In the hour bar, the upper and lower bars of the

current hour ash.

- Do you want to set more than one heating period per

day, e. g. heating period 1 from 10 – 12 hrs, heating period

2 from 16 – 18 hrs. Program heating period 1 (points 1 – 8)

as described above. Immediately after point 8, start

again with point 5 to set heating period 2.

Deleting a Weekly Timer Programming

1. Select the weekly timer mode with the button . In the

hour bar, the upper and lower bars of the current hour

ash.

2. Press the button . The current day

of the week

starts ashing in the display.

3. With the button , select the day of the week on which

previously programmed times are to be changed.

4. Select the anti-frost function ( ) with the button .

5. Go forward or backward in time with the button or .

As soon as you reach the programmed time, it is deleted.

Open Window Detection

The appliance causes a temperature check at regular

intervals and switches off if the temperature drops by 5 °C

within 20 minutes.

1. Press the button to switch on the function. The sym-

bol appears in the display.

2. Press the button again to switch the function off. The

symbol goes out.

- You can also activate and deactivate the function on the

appliance. To do this, press and hold the button for

approx. 3 seconds.

Ending Operation

1. Press the button to switch off the appliance.

2. Then pull the mains plug out of the socket.

Restore Factory Settings

Press and hold the and buttons on the appliance for

approx. 3 seconds. An acknowledgement tone sounds and

the appliance switches off. The factory settings are restored.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proficare GKH 3118 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proficare GKH 3118 Manual

Product: