Manual Proficare GKH 3118 (page 17 of 90) (English, German, Dutch, French, Italian, Polish, Spanish)

814770

Zoom out

Zoom in

1/90

PC-GKH3118_IM 01.09.23

• The settings are automatically adopted after approx.

5 seconds.

• The appliance remembers in which operating mode

it was last operated. When the appliance is switched

on again with the button or when the mains plug is

plugged back into the socket, the appliance starts in the

last selected operating mode.

• The appliance starts with full heating power ( ) when

it is switched on for the rst time or after the factory

settings have been restored.

• The temperatures for the two heating powers are set at

the factory as follows:

Comfort mode ( ) = 25 °C

ECO mode ( ) = 20 °C

- The temperature setting in comfort mode is always

5 °C higher than in ECO mode. If you change the

temperature in one of the two modes, the other mode

is automatically adjusted.

Operation

The operation of the appliance is described using the but-

tons on the remote control.

Switching On / Off

• Press the button to switch on the appliance.

- The temperature pointer displays the current ambient

temperature.

- Only when switching on for the rst time or after

restoring the factory settings:

If the ambient temperature is below 25 °C, the appli-

ance starts heating. The active heating is displayed by

the symbol .

• Press the button again to switch off the appliance.

Selecting the Operating Mode

Press the button repeatedly to select between the follow-

ing operating modes:

• Comfort Mode ( )

The appliance operates with full power of 1500 watts.

The symbol appears in the display. In this mode, the

temperature can be set between 10 °C and 50 °C.

• ECO Mode ( )

The appliance operates with half the power of 750 watts.

The symbol appears in the display. In this mode, the

temperature can be set between 5 °C and 45 °C.

• Anti-frost Function ( )

The appliance operates with full power of 1500 watts.

The symbol appears in the display. In this mode, the

temperature is xed at 6 °C and cannot be changed.

- If the ambient temperature drops below 5 °C, the

appliance automatically starts heating.

- If the ambient temperature rises above 7 °C, the appli-

ance switches off the heating operation.

• Weekly Timer (

–

)

With the weekly timer, a period of time can be set for

each day of the week during which the appliance is to

be active. In addition, you can set when the appliance

should operate in comfort mode, ECO mode or anti-frost

function. See the chapter “Weekly Timer” and “Program

the Weekly Timer” for more details.

Set Temperature

The set temperature ashes in the display. After approx.

5 seconds, the setting is automatically accepted. The cur-

rent ambient temperature is displayed again.

1. Select comfort mode or ECO mode with the button .

2. Press the button to increase the temperature. Or

press the button to decrease the temperature.

- The temperature setting in comfort mode is always 5 °C

higher than in ECO mode. If you change the temperature

in one of the two modes, the other mode is automatically

adjusted.

Child Lock

1. Press the button to activate the child lock. The

activated function is displayed by the symbol in the

display. The buttons on the appliance and on the remote

control have no function.

2. To deactivate the child lock, press the button again.

- You can also activate and deactivate the function on the

appliance. To do this, press and hold the button for

approx. 3 seconds.

Switching the Display Illumination Off and On

You can switch the backlight off and on both with the remote

control and on the appliance.

• Press the button on the remote control.

• Press and hold the button on the appliance for

approx. 3 seconds.

24 Hour Timer

You can set the appliance to operate for a specic time.

Only full hours can be set.

1. Press the button . The time display starts

ashing.

2. Use the or button to set the desired time. The

setting ( ) deactivates the function.

3. After the set time has elapsed, the appliance switches to

standby mode.

- The remaining hours are displayed in the time display.

For technical reasons, it is not possible to display the

remaining minutes.

- If the operating mode “Weekly Timer” is selected, this

function cannot be used.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Proficare GKH 3118 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Proficare GKH 3118 Manual

Product: