721953
8
Zoom out
Zoom in
Previous page
1/11
Next page
●Find a spacious place like square and have an assistant to help you
practice until you have enough confidence to operate it by yourself.
●Be certain to shut down the power when you transfer in- or out of the
chair, and adjust the speed through speed adjustment button.
●We recommend you set the lowest speed until you can operate the
electric wheelchair skillfully.
To Practice the stop operation, forward and backward. Push the handle,
the wheelchair move to anywhere you want.
●Firstly, ensure that it is the lowest speed when practice forward
operation. After Skilled, you can practice “S” shaped turn. After you are
familiar with "S" shaped turn, to practice backward operation, and pay
attention to the speed control setting. And the backward speed should
lower than forward speed.
WARNING!
Do not use your wheelchair unless getting help from your
assistant when the wheelchair is in manual mode. Otherwise
it may result in personal injury.
Do not set your wheelchair in manual mode by yourself while
you are seated in the wheelchair. Otherwise it may result in
personal injury. In this case, please ask your assistant to help you.
Do not set your wheelchair in manual mode when it is on an
incline. Otherwise, the wheelchair could be out of control to
roll down by itself, and result in personal injury.
LED display Fault Diagnosis Troubleshoong Remark
1 LED lamp ashes Baery is low capacity charg
2 LED lamp ashes The le motor failure Check the motor and wiring harness
3 LED lamp ashes The le brake failure Check if the brake lever is in the
correct posion, and if there is
damage for brake
4 LED lamp ashes The right motor failure Check the motor and wiring harness
5 LED lamp ashes The right brake failure Check if the brake lever is in the
correct posion, and if there is
damage for brake
6 LED lamp ashes Overload of the controller Check if the brake is released, and
wheels are locked.
7 LED lamp ashes Failure of the joysck Check if the rocker of controller in
the central posion
8 LED lamp ashes Failure of the controller itself Controller fault
9 LED lamp ashes Failure of the controller Controller fault
8. Safety devices and accident treatment
8.1 Circuit breaker: Refer to instruction manual 6.1.4
8.2 Safety belt:Refer to instruction manual 6.1.5
8.3 Please release the joystick whenever there is wheelchair fault ,
the wheelchair will be stopped.
7. Fault Diagnosis and Troubleshooting
For your convenience,this product has an automatic fault warning
function . Once it malfunctions, the LEDs on the controller will flash
with alarm sounded by the horn. You can find where a fault is
according to information in Table 2.
If the fault is still showing after checking out the fault based on that
in table 2, do not use the wheelchair. Please turn off the power and
consult your service agent immediately.
6.1.4Circuit breaker
The circuit breaker, which is located in the battery box, is set for the
wheelchair’s safety. Once motors or batteries overloaded, the circuit
breaker will trip to cut off the power. After one or two minutes, it will
automatically reset and then you can continue to drive the
wheelchair. 6.1.5 Lap belt
For your safety, the lap belt must be fastened before you drive the
wheelchair.
6.2 Operation
6.2.1 Precautions for operation
13
14
V. OPERATION V. OPERATION
left
backward
right
forward
8


Need help? Post your question in this forum.

Forumrules
1

Forum

pride-igo

Reset search

  • my chair pulls to one side on sloping ground despite trying to keep the joystick straight Submitted on 22-4-2023 at 14:38

    Reply Report abuse
  • how do i charge my igo with the single prong conector Submitted on 18-3-2022 at 11:05

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride IGO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride IGO in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info