721953
6
Zoom out
Zoom in
Previous page
1/11
Next page
CAUTION!
1. Make sure that the locating pins have been inserted into
the positioning holes when the wheelchair has been fully
folded open, and then it can be used.
2. Make sure that the anti-tippers are fully pulled out in order
to prevent the wheelchair back from tipping over, which may
result inpersonal injury.
3. Batteries must be fully inserted.
5.2 Folding
The wheelchair is foldable in order to reduce its bulk for transportation
and storage.
1. Turn off the power.
2. Switch the motor lock levers to drive mode to make sure that the
wheelchair has not been in manual mode(figure 11).
3. Turn the footrest upward(figure 12)
4. Press the buttons on both sides of seatback by your forefingers
to fold down the backrest (figure 13)
5. Pinch inward two thumb-levers of the right and left locating pins at the
back of the backrest (figure 14).
6. Pull up the footrest frame(figure 15) so that the chair frame will be fully
folded(figure 16). Turn back the armrest.(figure 17).
For ease of use, the wheelchair is equipped with two motor lock levers,
when you press down the motor lock lever to "manual", the wheelchair
will be in manual mode, and can be pushed by hand. When the motor
lock lever is pressed upward to "electric", the wheelchair will be on
electric mode, and can't be moved by hand(figure 11).
5.3 Debugging
5.3.1 When the motor lock lever is downward to manual mode, do not
move the chair by hands; when the motor lock lever is upward to
electric mode,do not move the chair by hands.
5.3.2 Press the joystick power,and the battery indicate light will be on.
5.3.3 Rotate the joystick lever toward front to the end, observe the
rotation of wheelchair wheels, and then rotate other direction to
observe if the wheels run.
5.3.4 Release the joystick lever, it will be come back to the middle
position, then you observe the wheels should be stopped.
9 10
IV.ASSEMBLY/FOLDING/DEBUG IV.ASSEMBLY/FOLDING/DEBUG
figure 6
figure 7
figure 13
figure 15
figure 14
figure 16
figure 12
figure 11
figure 8
figure 9
figure 10
6


Need help? Post your question in this forum.

Forumrules
1

Forum

pride-igo

Reset search

  • my chair pulls to one side on sloping ground despite trying to keep the joystick straight Submitted on 22-4-2023 at 14:38

    Reply Report abuse
  • how do i charge my igo with the single prong conector Submitted on 18-3-2022 at 11:05

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride IGO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride IGO in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info