514964
27
Zoom out
Zoom in
Previous page
1/108
Next page
Travel Scooter Series 27
Figure 28. Positioning Belt Bolts
V. COMFORT ADJUSTMENTS
POSITIONING BELT (OPTIONAL)
Your scooter seat may be equipped with an auto-type positioning belt
that can be adjusted for operator comfort. See gure 29 or 30. The
positioning belt is designed to help support the operator so that he or
she does not slide down or forward in the seat. The positioning belt is
not designed for use as a restraining device.
WARNING! The positioning belt should be secured
at all times. Never allow the positioning belt to hang
or drag on the oor as it may become entangled.
To install the positioning belt (if required):
1. Remove the seat from your scooter.
2. Place the seat upside down so that you can see the bottom of
the seat base. See gure 28.
3. Use a wrench to remove the two rear bolts on the outermost
part of the seat frame.
4. Insert the bolt through the appropriate ends of the positioning
belt and then reinstall the bolts back into the seat frame.
5. Tighten the bolts.
Metal Tab Style Positioning Belt
To adjust the positioning belt for operator comfort:
1. Insert the metal tab on the right side of the belt into the plastic
housing on the opposite strap until you hear a “click.” See gure 29.
2. Pull the strap on the right side of the belt until it is secure, but
not so tight as to cause discomfort.
To release the positioning belt:
1. Press the push button mechanism on the plastic housing.
Reusable Hook and Loop Fastener Style Positioning Belt
To adjust the positioning belt for operator comfort:
1. Align the two sides of the belt placing the looped-end side
directly above the coarser side (“hook”) of the opposite belt.
Press rmly together to fasten. See gure 30.
To release the positioning belt:
1. Grasp the looped-end side of the belt and pull up to detach
from the other side of the belt.
MANDATORY! Make sure the positioning belt is
properly secured to the scooter and is adjusted
for operator comfort before each use.
MANDATORY! Inspect the positioning belt for loose
parts or damage, including tears, worn spots,
bent hardware, or damaged latch mechanisms,
dirt or debris, before each use of the scooter. If
you discover a problem, contact your authorized
Provider for maintenance and repair.
Figure 29. Positioning Belt - Metal Tab Style
Figure 30. Positioning Belt - Reusable Hook
and Loop Fastener Style
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Go Go Ultra X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Go Go Ultra X in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pride Go Go Ultra X

Pride Go Go Ultra X User Manual - English - 42 pages

Pride Go Go Ultra X User Manual - German, Dutch - 108 pages

Pride Go Go Ultra X User Manual - Dutch - 44 pages

Pride Go Go Ultra X User Manual - Italian - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info