514964
26
Zoom out
Zoom in
Previous page
1/108
Next page
26 Travel Scooter Series
V. COMFORT ADJUSTMENTS
SEAT SUSPENSION ADJUSTMENT (IF
EQUIPPED)
The seat post acts as a shock absorber and can be
adjusted for different degrees of ride comfort. Use
the setscrews that are visible through the adjustment
window on the side of the post as a guide when making
adjustments. Slide the rubber boot towards the top of
the post to expose the setscrews. See gure 26.
To make seatpost adjustments:
1. Remove the seat from the Travel Scooter.
2. Remove the upper seat post from the Travel Scooter
by removing the detent pin from the lower portion
of the seat post, then lifting the post straight up and
off the Travel Scooter. See gure 25.
3. Insert a 13 mm socket with an extension into the
bottom of the post. See gure 26.
4. Rotate clockwise to soften the ride or rotate
couterclockwise to stiffen the ride.
5. Reinstall the seat post and seat.
UNDER-SEAT STORAGE (IF EQUIPPED)
To operate under-seat storage:
1. Lift up slightly on the latch on the side of the
under-seat storage bin (see gure 27) and swing
the under-seat storage bin out and away from the
Travel Scooter.
2. To close the under-seat storage bin, push the under-
seat storage bin toward the center of the Travel
Scooter until you hear the latch engage.
WARNING! Ensure both under-seat
storage bins are latched prior to
operating your travel scooter.
To remove the under-seat storage:
1. Lift up slightly on the latch on the side of the
under-seat storage bin (see gure 27) and swing
the under-seat storage bin out and away from the
travel scooter until it is fully open.
2. Lift the under-seat storage bin up and off the Travel
Scooter.
To install the under-seat storage:
1. Align the slot on the under-seat storage bin over the
securement post.
2. Lower the under-seat storage pin onto the
securement post and push the under-seat storage
bin toward the center of the Travel Scooter until
you hear the latch engage.
3
2
1
Figure 26. Seat Suspension Adjustment
1. Rubber Boot
2. Setscrew
3. Ratchet Insertion Point
IDENTIFICATION KEY
1
2
Figure 27. Under-seat Storage
IDENTIFICATION KEY
1. Latch
2. Securement Post
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Go Go Ultra X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Go Go Ultra X in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pride Go Go Ultra X

Pride Go Go Ultra X User Manual - English - 42 pages

Pride Go Go Ultra X User Manual - German, Dutch - 108 pages

Pride Go Go Ultra X User Manual - Dutch - 44 pages

Pride Go Go Ultra X User Manual - Italian - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info