722008
35
Zoom out
Zoom in
Previous page
1/48
Next page
35
Colt Series www.pridemobility.com
VI. COMFORT ADJUSTMENTS
POSITIONING BELT (OPTIONAL)
Your scooter seat may be equipped with an auto-
type positioning belt that can be adjusted for
operator comfort. The positioning belt is designed
to help support the operator so that he or she does
not slide down or forward in the seat. The
positioning belt is not designed for use as a
restraining device.
To install the positioning belt (if required):
1. Remove the seat from your scooter.
2. Place the seat upside down so that you can see
the bottom of the seat base. See figure 22 or
22A.
3. Use a wrench to remove the two back bolts on
the outermost part of the rear seat.
4. Insert the bolt through the appropriate ends of
the positioning belt and then reinstall the bolts
and belt back into the seat bottom.
5. Tighten the bolts.
To adjust the positioning belt for operator
comfort:
1. Insert the metal tab on the right side of the belt
into the plastic housing on the opposite strap
until you hear a “click.” See figure 23.
2. Pull the strap on the right side of the belt until
it is secure, but not so tight as to cause discom-
fort.
To release the positioning belt:
1. Press the push button mechanism on the plastic
housing.
MANDATORY! Make sure the posi-
tioning belt is properly secured to
the scooter and is adjusted for
operator comfort before each use.
MANDATORY! Inspect the posi-
tioning belt for loose or damaged
parts before each use of the
scooter. If you discover a problem,
contact your authorised Pride
Dealer for maintenance and repair.
Figure 23. Positioning Belt
Figure 22. Positioning Belt Bolts (CRS Junior seat)
POSITIONING
BELT BOLTS
POSITIONING
BELT BOLTS
Figure 22A. Positioning Belt Bolts
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Colt Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Colt Series in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info