722008
36
Zoom out
Zoom in
Previous page
1/48
Next page
36
www.pridemobility.com Colt Series
DISASSEMBLY
You can disassemble the scooter into several
pieces: the seat, the front section, the rear section,
the battery shroud, the basket and the batteries.
See figure 24 or 24A. No tools are required to
disassemble or assemble your scooter, but keep
in mind that the disassembled sections of the
scooter take up more floor space than the
assembled unit. Always disassemble or assemble
your scooter on a level, dry surface with
sufficient room for you to work and move around
your
scooter—about
1.5 metres (5 feet) in all
directions. Remember that some scooter
components are heavy and you may need
assistance when lifting them.
WARNING! Do not lift beyond
your physical capability. Ask for
assistance when necessary
while disassembling or
assembling your scooter.
1. Remove the seat by lifting it straight up and
off of the scooter. If you encounter resistance
when removing the seat, disengage the seat
rotation lever and swivel the seat back and
forth while lifting up on the seat.
2. Gently pull the battery shroud forward, then
lift up and off of the scooter. See figure 25.
3. Disconnect the battery tie-down strap.
4. Unplug both battery harnesses by depressing
the tabs and then pulling each harness straight
up. See figure 26.
5. Remove the batteries from the battery wells.
WARNING! Failure to unplug both
battery harnesses prior to
separating the front and rear
sections could result in
permanent damage to the
scooter.
Frame Separation
1. Arrange the front wheel(s) in a straight
forward-facing position.
2. Lower the tiller and tighten the tiller
adjustment knob.
VII. DISASSEMBLY AND ASSEMBLY
Figure 24. Scooter Components
FRONT SECTION
SEAT
REAR SECTION
BATTERY SHROUD
BATTERIES
BASKET
Figure 24A. Scooter Components (Colt Twin model only)
REAR SECTION
SEAT
FRONT SECTION
BASKET
BATTERIES
BATTERY SHROUD
Figure 25. Battery Shroud Removal
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Colt Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Colt Series in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info