722008
33
Zoom out
Zoom in
Previous page
1/48
Next page
33
Colt Series www.pridemobility.com
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to several different
heights. See figure 20.
1. Remove the seat and/or shroud from your
scooter. See VII. “Disassembly and Assembly.”
2. Remove the seat height adjustment bolt.
3. Raise or lower the upper seat post to the
desired seat height.
4. While holding the upper seat post at that
height, match up the locating holes in the upper
seat post with those of the lower seat post.
5. Insert the seat height adjustment bolt through
the locating holes of both the upper and lower
seat posts.
6. Reinstall the nut onto the seat height
adjustment bolt and tighten.
7. Reinstall the shroud and the seat.
SEAT HEIGHT ADJUSTMENT—COMFORT
SEAT POST (IF EQUIPPED)
To reposition the seat to one of two different
heights:
1. Remove the seat from your scooter. Push forward
and hold the seat rotation lever to disengage the
seat, then rotate the seat and lift it off of the
scooter.
2. Remove the rear shroud.
3. Push up the seat post boot to uncover the
hardware.
4. Push down on the seat post while loosening and
removing the shoulder bolt, washer, and nut. See
figure 21.
5. Remove the comfort spring.
6. To raise the seat to the top most mounting hole,
insert the height adjustment spacer. To lower the
seat to the lowest mounting hole, remove the
height adjustment spacer.
7. Reinstall the comfort spring.
8. Hold the upper seat post at the desired height and
match up the locating holes in the lower seat post.
Utilize the top holes for the upper position or the
bottom holes for the lower position.
9. Press down on the seat post while reinstalling the
hardware and tightening to 210 in • lb (24 N • m).
10. Replace the rear shroud and the seat.
Figure 20. Seat Height Adjustment
LOWER
SEAT
POST
SEAT HEIGHT
ADJUSTMENT
BOLT
NUT
LOCATING
HOLE
UPPER SEAT
POST
VI. COMFORT ADJUSTMENTS
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Colt Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Colt Series in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info