Manual Pride Colt Deluxe 2.0 (page 39 of 44) (English)

722005

Zoom out

Zoom in

1/44

Mid-size Scooter Series

FUSE REPLACEMENT

In the event a fuse should cease to work:

1. Remove the fuse by pulling it out of its slot.

2. Examine the fuse to be sure it is blown. See figure 26.

3. Insert a new fuse of the same rating.

WARNING! The replacement fuse must

exactly match the rating of the fuse

being replaced. Failure to use properly

rated fuses may cause damage to the

electrical system.

Working Fuse

Blown Fuse (Replace)

Figure 26. Fuse Replacement

ABS PLASTIC SHROUDS

 The front tiller shroud, front shroud and the rear shroud are formed from durable plastic and are coated

with an advanced formula urethane paint.

 A light application of car wax will help the shrouds retain their high gloss.

AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY

These items are all prelubricated, sealed and require no subsequent lubrication.

MOTOR BRUSHES

The motor brushes are housed inside of the motor transaxle/assembly. They should be inspected

periodically for wear by your authorized Provider.

CONSOLE, CHARGER AND REAR ELECTRONICS

 Keep these areas free of moisture.

 Allow these areas to dry thoroughly if they have been exposed to moisture before operating your

scooter again.

NYLON LOCK NUT REPLACEMENT

Any nylon insert lock nut removed during the periodic maintenance, assembly or disassembly of the

scooter must be replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause

damage to the nylon insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available

at local hardware stores or through your authorized Provider.

STORING YOUR SCOOTER

If you plan on not using your scooter for an extended period of time, it is best to:

 Fully charge its batteries prior to storage.

 Disconnect the batteries from the scooter.

 Store your scooter in a warm, dry environment.

 Avoid storing your scooter where it will be exposed to temperature extremes.

 Recommended storage temperature: -104ºF/-75ºC to 158ºF/70ºC.

WARNING! Always protect batteries from freezing temperatures and never charge a frozen

battery. Charging a frozen battery can result in damage to the battery.

VIII. CARE AND MAINTENANCE

I bought a 'new' Pride Colt Deluxe 2.0. Later I discovered that both Track Rods where they fit on the Track Rod Ends as best as I could see has some play in them. I rang up the Shop who supplied it, & they sent someone out with a Tie Rap, & then put one on each of them to hold them firmly together. My question is, is this standard procedure when dealing with Mobility Scooters, or are they manufactured 'disabled' to be like the Owner ? Submitted on 3-10-2024 at 20:35
Reply Report abuse
Console shows three green lights are out while charger is flashing fully charged Submitted on 15-10-2023 at 15:01
Reply Report abuse
How do I enable the scooter to go from pushing to driving mode? Submitted on 1-7-2023 at 19:42
Reply Report abuse
Why is my suspension on my pride deluxe Colt so tight Submitted on 21-9-2021 at 11:28
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pride Colt Deluxe 2.0 in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pride Colt Deluxe 2.0 Manual

Product: