722005

Pride Colt Deluxe 2.0 Manual

13
Zoom out
Zoom in
Previous page
1/44
Next page
13
Mid-size Scooter Series
NOTE: If the scooter is placed in freewheel mode (manual freewheel lever forward) while the key is in
the “on” position, the scooter will not run until the manual freewheel lever is pushed rearward and the
key is turned to the “off” position, then back to the “on” position.
Motor/Transaxle Assembly
The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your
scooter’s batteries into the controlled mechanical energy that drives the scooter’s wheels.
Figure 5. Rear Components
IDENTIFICATION KEY
1. MANUAL FREEWHEEL LEVER
2. MOTOR/TRANSAXLE ASSEMBLY
3. ANTI-TIP WHEELS
4. SAFETY FLAG BRACKET
Manual Freewheel Lever
Whenever you need or want to push your scooter
for short distances, you can put it in freewheel
mode.
1. Remove the key from the key switch.
2. Push forward on the manual freewheel lever to
disable the drive system and the brake system.
This will enable you to push the scooter.
NOTE: If your scooter is equipped with a 2-
position manual freewheel lever, you must pull up
on the lever and then push forward on the manual
freewheel lever to disable the drive system and the
brake system. This will enable you to push the
scooter.
3. Pull back on the manual freewheel lever to
reengage the drive and the brake systems and
take your scooter out of freewheel mode.
WARNING! When your scooter is in
freewheel mode, the braking
system is disengaged.
Disengage the drive motors only
on a level surface.
Ensure the key is removed from
the key switch.
Stand to the side of the scooter
to engage or disengage free-
wheel mode. Never sit on a
scooter to do this.
After you have finished pushing
your scooter, always return it to
the drive mode to lock the
brakes.
II. YOUR SCOOTER
… 13 …


Need help? Post your question in this forum.

Forumrules
1

Forum

pride-colt-deluxe-2.0

Reset search

  • I bought a 'new' Pride Colt Deluxe 2.0. Later I discovered that both Track Rods where they fit on the Track Rod Ends as best as I could see has some play in them. I rang up the Shop who supplied it, & they sent someone out with a Tie Rap, & then put one on each of them to hold them firmly together. My question is, is this standard procedure when dealing with Mobility Scooters, or are they manufactured 'disabled' to be like the Owner ? Submitted on 3-10-2024 at 20:35

    Reply Report abuse

  • Console shows three green lights are out while charger is flashing fully charged Submitted on 15-10-2023 at 15:01

    Reply Report abuse

  • How do I enable the scooter to go from pushing to driving mode? Submitted on 1-7-2023 at 19:42

    Reply Report abuse

  • Why is my suspension on my pride deluxe Colt so tight Submitted on 21-9-2021 at 11:28

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Colt Deluxe 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Colt Deluxe 2.0 in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info