534698
41
Zoom out
Zoom in
Previous page
1/54
Next page
3. Operation
UP! 3D Printer User Manual 40
6. Maintenance
Changing the Material
First withdraw the leftover material from the printer. Initialize the printer and
choose 3D print->Maintain‖. Click Withdraw‖ and the system
automatically begins to heat the nozzle. When the nozzle reaches the
correct temperature, the printer will beep, and you can gently withdraw the
material.
Place a new spool of material on the spool holder, and pull it through the
filament tube, until the material is about 10cm out of the tube, then insert it
into the hole at the top of the extruder head.
Select the maintain‖ menu form the ―3D Print‖ menu. Then press the
―Extrude button in the maintain‖ dialogue. After the printer nozzle has
warmed up to 260°C, the printer will beep. Push the filament into the hole
at the top of the extruder head, with a little pressure, and the extruder will
automatically extrude material. The plastic thread squeezed out of the
nozzle should be thin, bright and smooth.
If the nozzle is blocked, remove the nozzle and clean it.
The extruder and platform are hot. Use gloves when working
in this area of printer.
Vertical Calibration
The Vertical calibration procedure allows you to ensure that the printer platform
is perfectly horizontal and that the printer prints consistently in the X, Y and Z
direction.
First, print the supplied Calibration model on your printer. The calibration file is
in C:\Program Files\UP\Example.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PP3DP Up Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PP3DP Up Plus in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info