534698
39
Zoom out
Zoom in
Previous page
1/54
Next page
3. Operation
UP! 3D Printer User Manual 38
3. Gently slide the spatula under the model and slowly wiggle it back
and forth to pry loose the model. Remember to use gloves as the platform
and model may still be hot.
CAUTION: It is strongly recommended that you ware the gloves to
remove the model from the perfboard.
Removing Support Material
Printed models are composed of two parts. One part is the model itself, and
the other part is the support material used to support any overhanging parts of
the model.
The support material is the same physical material as the model material, but
the support material is printed at a much lower density. It is very easy to
distinguish the model from the support material so it is easy to remove.
Have a look at the teapot in the above pictures. The left picture shows the
teapot with support material removed, and the right picture shows the teapot
with its support material still attached.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PP3DP Up Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PP3DP Up Plus in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info