534698
34
Zoom out
Zoom in
Previous page
1/54
Next page
3. Operation
UP! 3D Printer User Manual 33
Angle: Angle at which support material gets used. For example if 10° is used,
support material only gets used if angle of surface is greater than 10° from
horizontal (so support material is almost not used unless there is a direct
overhang), If set to 50° than support material is used for any surface is greater
than 50° away from horizontal.
Set to > 10°
Set to > 50°
There is always a delicate balance between
minimizing the amount of support material,
versus the quality of the part, versus the
difficulty of removing support material.
The orientation of the part on the print platform
is also critical in determining both how much
support material gets used, and also how
difficult the support material will be to remove.
As a general rule, it is easier to remove
support material from the outside of a part than
from the inside. As can be seen in the picture
to the right, the part would use a lot more
support material if printed with the opening
facing downwards than if it were facing
upwards.
Space: The distance between the lines of non-solid support material. Changing
this parameter requires some experience in balancing the quantity of support
material used, ease of support material removal, and part print quality.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PP3DP Up Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PP3DP Up Plus in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info