751774
19
Zoom out
Zoom in
Previous page
1/26
Next page
Generating Power to the World
Page 19 of 26
Operators Manual
Engine Oil Maintenance
Checking the Engine Oil Level
1) Maintain Proper Oil Level
Between “ADD”(Y) and “Full” (X) on
the oil level Gauge. DO NOT fill
above “Full” mark as catastrophic
engine damage will occur.
2) Remove the oil filler cap and add oil if necessary. Clean the oil filler cap
with a clean rag or towel. Reinstall the oil filler cap by hand.
Lubricating Oil Specifications
Use only good quality Lubricating Oil, which meets the following Specifications.
API Class
CJ-4
Engine Oil
LUBRICATING OIL VISCOSITY
RECOMMENDATIONS
The minimum ambient temperature during cold engine start-up and the maximum ambient temperature
during engine operation determine the proper SAE viscosity grade of oil.
Refer to the Engine Oil Viscosity Table below (Lowest Ambient Temperature) in order to determine the
required oil viscosity for starting an engine in cold conditions.
Refer to the Engine Oil Viscosity Table below in order to select the oil viscosity for engine operation at the
ambient temperature range that is anticipated.
Ambient Temperature Range
Above 25 C (77° F)
SAE 10W-30 or 15W-40
-10°C to 25°C (14° to 77° F)
SAE 10w-30 or 15W-40
Below -10° C (14°F)
SAE 10W-30
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerTech PTGK-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PTGK-20 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info