751774
26
Zoom out
Zoom in
Previous page
1/26
Next page
Generating Power to the World
Page 26 of 26
Operators Manual
TROUBLESHOOTING
TROUBLE
POSSIBLE CAUSE
SUGGESTED ACTION
Generator will not start via
remote panel or other source
Generator is not in “auto” mode
Put Generator in Auto mode via
controller
Remote connection plug is not
connected
Reconnect Remote control Plug
Engine does not crank from
local controller
Battery is low or terminals are
dirty.
Clean terminals and re-charge
battery.
Replace battery if necessary.
Crank circuitry wiring improperly
connected.
Refer to engine control wiring and
check crank connections.
Engine cranks but doesn’t start
Out of fuel.
Check fuel level, add fuel if
necessary.
Fuel relay damaged
Check fuel relay and replace if
damaged.
Fuel System lost prime
Use Primer on top of fuel filter
Engine Starts but shuts down
after a few seconds
See failure on controller LCD
Display
Engine Starts but genset not
producing Voltage
Main breaker is in the “off”
position
Turn Main Breaker to the “on”
position
Visually inspect all Generator
Output leads for connectivity
.
For all other trouble shooting issues please contact one of our dealers on our website.
www.powertechgenrators.com or scan the QR code below.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PowerTech PTGK-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PowerTech PTGK-20 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info