481030
15
Zoom out
Zoom in
Previous page
1/22
Next page
POWXQ5360 EN
Copyright © 2010 VARO P a g e | 15 www.varo.com
9.5 Ripping (fig 21)
Fig 21
Remove the miter gauge, and secure the rip fence to the table.
Raise the blade until it is approximately 1/8” (3.2 mm) above the top of the work piece.
Place the work piece flat on the table and against the fence so that the larger portion of
the work piece is between the blade and the fence. Keep the work piece approximately 1”
(2.5 cm) away from the blade.
Turn the saw ON, and wait for the blade to reach full speed.
Slowly feed the work piece into the blade by pushing forward on the section of the work
piece that will pass between the blade and the fence
Do not place your thumbs on the table top. Always hold the work piece while the blade is
turning. Do not let go of it in order to reach for the push stick. When both thumbs touch the
front edge of the table, complete the cut using a push stick.
Always use the push stick when performing ripping operations.
Continue to push the work piece with the push stick until it passes the blade guard and
clears the rear of the table.
Do not pull the work piece backward while the blade is turning. Turn the switch OFF, and
unplug the power cord. Wait until the blade comes to a complete stop and slide the work
piece out.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQ5360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ5360 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ5360

Powerplus POWXQ5360 User Manual - German - 22 pages

Powerplus POWXQ5360 User Manual - Dutch - 23 pages

Powerplus POWXQ5360 User Manual - French - 21 pages

Powerplus POWXQ5360 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info