481023
8
Zoom out
Zoom in
Previous page
1/11
Next page
POWXQ5320 EN
Copyright © 2011 VARO Page | 8 www.varo.com
7.4 Filling the water reservoir (13)
§ Remove bevel table (16)
§ Fill water reservoir with clean tap water to fill line
Note: Overflow drain prevents overfilling
§ Replace bevel table
7.4.1 To change reservoir water:
§ Unplug tile saw
§ Remove overflow drain and empty into bucket, do not allow water to splash onto ground or
around machine.
§ Discard waste water in accordance with local regulations
8 OPERATION
You may use this tool for the purposes listed below:
Straight line cutting operations such as cross cutting, mitering, ripping and beveling.
Note: this tilecutter is designed to cut man-made tile, pavers, natural stone
products, and stone tile products only.
8.1 Switching on and off
§ To turn the machine ON, press the green push button.
§ To turn the machine OFF, press the red push button.
8.2 Using the rip guide and miter guide
The rip guide (6) can be used from both the left and the right side of the cutting wheel (1).
§ Turn knob (8) on rip guide counterclockwise to loosen.
§ Adjust the rip guide in the desired position using the rip guide scale(7), located on front
and rear of table, to set rip guide to desired width of cut.
§ Rotate the knob, clockwise, to tighten securely.
8.2.1 To adjust angles:
§ Adjust rip guide to desired position and secure tightly.
§ Slide miter guide onto rip guide from the front
§ Adjust to desired angle using angle scale and tighten securely with knob.
8.3 Performing straight and angle cuts
8.3.1 Straight cuts
§ Place the guide at the desired cutting distance.
§ Push the tile forward. Don't push to hard and let the disc do the job.
8.3.2 Angle cuts
- angle cuts at 45°
Use the supplied adjustable metal angle guide to cut a tile at 45°.
Place 1 corner of the tile in the angle guide, hold the tile firmly in its position, then Push the tile
forward. Don't push to hard and let the disc do the job.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQ5320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ5320 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ5320

Powerplus POWXQ5320 User Manual - German - 12 pages

Powerplus POWXQ5320 User Manual - Dutch, French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info