481023
6
Zoom out
Zoom in
Previous page
1/11
Next page
POWXQ5320 EN
Copyright © 2011 VARO Page | 6 www.varo.com
5.6 Check damaged parts
§ Before further use of tool, it should be carefully checked to determine that it will operate
properly and perform its intended function.
§ Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting
and any other conditions that may affect its operation.
§ A guard or other part that is damaged should be properly repaired or replaced by an
authorized service centre unless otherwise indicated in this instruction manual.
§ Have defective switches replaced by an authorized service centre.
§ Do not use the tool if the switch does not turn it on and off.
6 ADDITIONAL SAFETY INSTRUCTIONS FOR TILE CUTTERS
§ Make sure that the cutting disc is correctly screened by the guard.
§ Never remove the riving knife. The distance between the cutting disc and the riving knife
should not exceed 5 mm.
§ Do not use cutting discs which are bent, deformed or otherwise damaged.
§ Do not use cutting discs which do not comply with the specifications stated in this manual.
§ Never start cutting tiles before the machine reaches full speed.
§ Never attempt to cut extremely small work pieces. Only cut tiles with a max diameter of
180 mm.
§ Do not leave the work area until the machine has been switched off and the cutting disc
has come to a complete standstill.
§ Never attempt to stop the cutting disc by exerting pressure on the side of the disc.
§ Always unplug the machine before performing any maintenance.
§ Do not use the machine before it has been completely assembled and installed according
to the instructions.
§ Do not perform any design, assembly or Construction activities on the table while the
machine is switched on.
§ Unplug the machine and clean the table before leaving the work area.
6.1 Power supply
§ This tile saw must be connected to an earthed 230V - 50Hz power source.
§ This power source must be secured by a 16A fuse.
§ Your machine is supplied with a 30mA residual current device to protect the user against
electric shock. The device has a test button. Please test this regularly. Preferable before
each work.
§ It can only protect you when the power mains to which the tool is plugged is properly
grounded.
§ Have the proper outlet installed by a qualified electrician.
§ Check with a qualified electrician or service personnel if the grounding instructions are not
completely understood, or if in doubt as to whether the tool is properly grounded.
6.2 Diamond blades
§ Only use 180 mm diameter Continuous Rim Wet Diamond blades.
§ DO NOT use larger, segmented or 'turbo' blades, wood sawing blades, or any other
cutting device. Severe bodily injury, and damage to your saw can occur.
§ Inspect blades daily for cracks or uneven wear. Discard cracked, chipped or bent blades!
§ Ensure the blade is mounted with the rotation arrow in the proper direction and is securely
tightened with a wrench.
§ Always ensure a continuous flow of water on both sides of the blade before cutting any
material.
§ Do not operate the machine without all safety guards in position
§ Do not force the material into the blade. Let the blade cut at its own speed.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXQ5320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXQ5320 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXQ5320

Powerplus POWXQ5320 User Manual - German - 12 pages

Powerplus POWXQ5320 User Manual - Dutch, French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info