725398
8
Zoom out
Zoom in
Previous page
1/15
Next page
POWXG7216 EN
Copyright © 2016 VARO NV P a g e | 8 www.varo.com
For the tilling position (j):
Pull the clevis pins (h) out of the axis.
Put the wheels at the ends of the axis, the sides of the wheels should align with the ends of
the axis.
Insert the clevis pins in the wheels.
10.5 Assembly of the bumper (FIG.8), fender (19) and the handle bar cover
Install the bumper on the front of the cultivator with the screws (k).
Install the fender (19).
Install the handle bar cover.
11 CONTROLS
11.1 Fuel valve lever (FIG. 9)
The fuel valve lever (1) must be in the ON position when starting the engine. Make sure
the fuel drain screw is tightened securely.
To stop the supply of fuel, turn the fuel valve lever to the OFF position.
11.2 Choke throttle lever (FIG. 10)
When starting cool engine, turn throttle choke lever (2) to CLOSED position.
When starting warm engine and operating, turn throttle choke lever to OPEN position.
11.3 Engine switch (FIG. 11)
Turn the engine switch (3) to the ON position to be able to start the engine.
To stop the engine, turn the engine switch to the OFF position.
11.4 Throttle lever handle bar
Adjust the motor speed by moving the throttle lever.
11.5 Forward lever (FIG. 13)
When the main clutch lever (5) is pressed down, the clutch is engaged and power is
transmitted to the transmission.
When the main clutch lever is released, the clutch is disengaged and power is not
transmitted.
11.6 Reverse lever
Raise the handle bar (6) slightly and press down the reverse lever (7) to engage the clutch
and transmit power for a backward movement.
Use the reverse lever only when necessary to move the cultivator away from an obstacle.
Always check the area behind you and make sure it is clear of any obstacles.
11.7 Tilling depth adjustment (FIG. 14)
The drag bar of the depth adjustment (8) is used to control the tilling depth.
The tilling depth can be adjusted by holding the drag bar (s) backward to release it and
sliding the drag bar up and down as necessary.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG7216 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG7216 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG7216

Powerplus POWXG7216 User Manual - German - 16 pages

Powerplus POWXG7216 User Manual - Dutch - 15 pages

Powerplus POWXG7216 User Manual - French - 16 pages

Powerplus POWXG7216 Additional guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info