725398
7
Zoom out
Zoom in
Previous page
1/15
Next page
POWXG7216 EN
Copyright © 2016 VARO NV P a g e | 7 www.varo.com
8 EMERGENCY
Familiarise yourself with the use of the product by reading the operating instructions
completely. Note the safety instructions and follow them very carefully. This will help you
prevent risks and hazards.
Be always alert when using the product, so that you can recognise hazards early and
respond to them. Prompt intervention can prevent serious injuries and material damage.
Switch off the motor in the event of a problem or unusual noises or vibrations. If
necessary, have the product repaired by a qualified specialist before using the product
again.
9 RESIDUAL RISKS
Even if you operate this power tool according to instructions, some residual risks always
remain. The following hazards may occur in connection with the type and design of this
power tool:
1. Injuries and material damage caused by flying debris.
2. Damage to health resulting from hand-arm vibrations if the power tool is used over a long
period of time or is not properly handled and maintained.
3. Hearing damage if no appropriate hearing protection is worn.
4. Damage and injuries caused by running the product over installed water and power lines.
10 ASSEMBLY INSTRUCTIONS
Open the packing and remove all loose parts.
Remove the upper part of the packing.
Remove the assembly screws (6pcs.) from the metal frame.
Remove the upper part of the metal frame.
Remove the protecting foil form the machine.
Assemble the depth regulator.
10.1 Handle bar bracket assembly (FIG.2-3)
Fix the handle bar bracket (a) and tighten the bolts (b) and locking nuts (c).
10.2 Cable assembly (Fig. 4)
Assemble the handle bar.
Pull the cables through the cable guides (e) on the handle bar.
Ply the cable guides to close them and use the included straps to keep the cables together
right before the lower and upper cable guide. The cable should not be strained!
10.3 Reverse cable assembly (FIG. 5))
Pull the cable through the cable guides (e) on the handle bar.
Fix the cable with the locking nuts (f).
Fix the reverse lever to the handle bar bracket.
10.4 Wheel assembly (FIG. 6-7)
Install the wheels.
The wheels have two positions for different purposes:
A free wheel position for transportation of the cultivator.
A tilling position for tilling.
For the free wheel position (g):
Pull the clevis pins (h) out of the wheels.
Put the wheels as close as possible to the middle of the axis; push until you feel resistance.
Insert the clevis pins in the axis.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG7216 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG7216 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG7216

Powerplus POWXG7216 User Manual - German - 16 pages

Powerplus POWXG7216 User Manual - Dutch - 15 pages

Powerplus POWXG7216 User Manual - French - 16 pages

Powerplus POWXG7216 Additional guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info